FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 6 of 6

Thread: Wings-A-Loft with DMC Digital Door Lock Module

  1. #1
    Member Midnight Specialist's Avatar
    Join Date:  Jul 2020

    Location:  Boston

    Posts:    82

    My VIN:    02260

    Club(s):   (DMA)

    Wings-A-Loft with DMC Digital Door Lock Module

    I'm going to be installing the system, but reading the instructions has the keyless entry controller connecting to the door lock relay. The digital door lock module has two wires that are used for the DMC keyless entry, but I'm unsure which is which, or if to use them all all and tap the wires that would correspond to the original door lock relay. Has anyone else done this?

  2. #2
    Senior Member
    Join Date:  Jun 2016

    Location:  Austin MN

    Posts:    581

    My VIN:    03500

    Quote Originally Posted by Midnight Specialist View Post
    I'm going to be installing the system, but reading the instructions has the keyless entry controller connecting to the door lock relay. The digital door lock module has two wires that are used for the DMC keyless entry, but I'm unsure which is which, or if to use them all all and tap the wires that would correspond to the original door lock relay. Has anyone else done this?
    I would just use the wires on the digital module. I don't know witch wire is witch. But it's not that big of a deal if you hook them up wrong. Lock will be unlock and so on. 50/50 chance you get it right the first time.


    Dave B.

  3. #3
    Senior Member
    Join Date:  Dec 2018

    Posts:    1,244

    Quote Originally Posted by WHO1DMC View Post
    I would just use the wires on the digital module. I don't know witch wire is witch. But it's not that big of a deal if you hook them up wrong. Lock will be unlock and so on. 50/50 chance you get it right the first time.


    Dave B.
    It always seems like, when I have a 50/50 chance, it's 100% that I get the wrong one. Maybe the OP could hook it up with out solder and try it first.

  4. #4
    Senior Member
    Join Date:  Jun 2016

    Location:  Austin MN

    Posts:    581

    My VIN:    03500

    Quote Originally Posted by Helirich View Post
    It always seems like, when I have a 50/50 chance, it's 100% that I get the wrong one. Maybe the OP could hook it up with out solder and try it first.
    I wasn't suggesting a permanent connection first time around.

    I always do a soft connection before I go permanent.


    Dave B.

  5. #5
    Member Midnight Specialist's Avatar
    Join Date:  Jul 2020

    Location:  Boston

    Posts:    82

    My VIN:    02260

    Club(s):   (DMA)

    Good call. Got it working.


    Sent from my iPhone using Tapatalk

  6. #6
    Senior Member
    Join Date:  May 2014

    Location:  West Islip, NY

    Posts:    243

    My VIN:    16377

    Quote Originally Posted by Helirich View Post
    It always seems like, when I have a 50/50 chance, it's 100% that I get the wrong one.
    This always happens to me when I play Sudoku. My new strategy is to pick the box than I wouldn't normally have picked. 60% of the time it works every time.

    -Nick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •