Does anyone have a Craig radio and know what size the in-line fuse in back is?
Sent from my iPhone using Tapatalk
Location: Boston
Posts: 82
My VIN: 02260
Club(s): (DMA)
Does anyone have a Craig radio and know what size the in-line fuse in back is?
Sent from my iPhone using Tapatalk
Location: Northwest Florida
Posts: 324
My VIN: Midproduction
Location: Boston
Posts: 82
My VIN: 02260
Club(s): (DMA)
You’re the best! Thank you!
Sent from my iPhone using Tapatalk
Posts: 12
I’m having a very hard time searching online where to fine the location of the inline fuse. I apologize if this has been covered. My #11 30amp fuse is working fine cos all the other components work fine but my Craig and antenna won?t turn on. Appreciate any help.
Location: Wisconsin
Posts: 43
My VIN: 4365
There are two inline fuses on the radio harness. I found one of mine was blown as I pulled out the radio. One is on the purple wire, the other is on the green/white wire.
Sent from my Pixel 7 using Tapatalk
Location: Northern NJ
Posts: 8,582
My VIN: 10757 1st place Concourse 1998
Originally Posted by mrsandman
There are two inline fuses on the radio harness. I found one of mine was blown as I pulled out the radio. One is on the purple wire, the other is on the green/white wire.
Sent from my Pixel 7 using Tapatalk
One fuse is power all the time to hold the presets and the other is power when the ignition is on to run the radio.
David Teitelbaum
Posts: 12
MR SANDMAN! You?ve brought me a dream! Thank you so so much. Seeing it now from your pictures I never came close to or saw a picture. I read about the purple wire and green/white wire but not the fuse location. I watched DeLoreanTECH?s great video about removal yesterday and am now excited to venture forth. Thank you again.
Posts: 12
And I know this will sound dumb, but safe than sorry with these cars. It’s ok to remove this shrink wrap? Obviously to check and possibly replace a fuse, but can they be left exposed after without this black wrap? Sandman, I see in that picture they’re left exposed. I apologize, I haven’t been on here in years, so I’m having to remember how to post pictures.
Last edited by FireTrails83; 06-19-2023 at 03:00 PM.
Location: Wisconsin
Posts: 43
My VIN: 4365
There isn't a fuse under the shrink wrap. No need to uncover. I pulled it off out of curiosity. If you do pull it off, make sure to shrink wrap it again or tape it somehow. You don't want those components to accidentally touch anything.
Sent from my Pixel 7 using Tapatalk
Posts: 12
Ok one: thank you I won?t whew! And two: so they’re the long white plastic pieces near the end on the right side of your picture? I think I’m checking on the wrong side of the harness. I’m checking after the connecting clip.
Last edited by FireTrails83; 06-19-2023 at 03:32 PM.
Posting Permissions
Reply With Quote
