Hi, having trouble seeing where the vacuum pipe (part #101290) connects. It comes out of the vacuum capsule on the transmission but not sure where other end is supposed to run too? Any help would be greatly appreciated..
Location: Massachusetts
Posts: 4
Hi, having trouble seeing where the vacuum pipe (part #101290) connects. It comes out of the vacuum capsule on the transmission but not sure where other end is supposed to run too? Any help would be greatly appreciated..
Location: San Francisco Bay Area, Calif.
Posts: 2,082
My VIN: 0934
Club(s): (NCDMC) (DCUK)
Did you already look at this parts diagram with that part in it?
It's item #26 there.
March '81, 5-speed, black interior
Posts: 4,808
My VIN: 3937
And plugs into item #27, which is a long skinny metal tube that goes from that rubber hose back towards the rear and runs along the driver's side of the transmission. It goes quite close to the ATF dipstick tube.
IMG_1019.jpgIMG_1174.jpg
Sept. 81, auto, black interior
Location: Massachusetts
Posts: 4
Originally Posted by Jonathan
Awesome thank you for the help
Location: Massachusetts
Posts: 4
so i am having a hard time finding where it connects on the engine side, is there any way you could get a picture of that end of the connection please?
Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
No picture handy but it connects on the back side of the driver side intake runner.
CAUTION - this fitting is not present on engines installed in cars with manual transmission. The hole is there but not the fitting so it can be changed. Just something to remember if you are reconfiguring a car or swapping engines (or even intake manifolds).
Dave S
DMC Midwest - retired but helping
Greenville SC
Location: Massachusetts
Posts: 4
ok i will try to find that - thanks for the help
Reply With Quote
