FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 9 of 9

Thread: Heninger LCAs, Martin G springs, LCA supports, UK ball joints, SKF front bearings

  1. #1
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,108

    My VIN:    10270

    Heninger LCAs, Martin G springs, LCA supports, UK ball joints, SKF front bearings

    F/S: Some new/unused parts, and recently removed suspension parts. Most things here will need some cleaning & fresh paint. Located in mid-MI.

    I take Paypal and can ship USPS or UPS and will ship worldwide.
    Please provide ZIP or destination country for estimates.
    I don't have a VAT number - please plan on duties at import for EU/UK shipments.

    Heninger & Associates lower control arms w/ urethane inner bushings
    Purchased before backing washers were shipped. I would center the bushings and source and install steel washers as shown in archived product photos.
    Equipped with Febi VW ball joints, while the fit was good w/ steering knuckle, they should changed to a DMC recommended part.
    Comparable in weight to the currently made aluminum LCAs, but in heavy gauge steel.
    $600 for the pair
    $700 if paired with the Amsteer lower ball joints below.

    Martin G Springs - lower front end plus a higher spring rate than most other springs. For a non-coil over suspension these (were) and would be my first choice.
    $120

    DeLorean Europe lower arm supports - original steel type.
    $120

    New parts, still in packaging:
    2x Amsteer / UK lower ball Joints
    $60 each

    2x SKF front wheels bearings
    $25 each

    https://photos.app.goo.gl/HE7BVj4tLDgFhmMM8
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  2. #2
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,108

    My VIN:    10270

    Springs are sold!
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  3. #3
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    2,304

    My VIN:    <2000

    Club(s):   (DCF)

    PM'ed
    Dana

    1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
    Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
    1985 Chevrolet Corvette, Z51, 4+3 manual
    2006 Dodge Magnum R/T (D/D)
    2010 Camaro SS (Transformers Edition)

  4. #4
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,108

    My VIN:    10270

    Arms are sold!
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  5. #5
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,108

    My VIN:    10270

    How about $650 for the LCAs with the Amsteer balljoints included? Would like to get these on to their next owner.

    Also have a K&N filter & filter retaining clips - $20
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  6. #6
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    2,304

    My VIN:    <2000

    Club(s):   (DCF)

    PM'd
    Dana

    1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
    Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
    1985 Chevrolet Corvette, Z51, 4+3 manual
    2006 Dodge Magnum R/T (D/D)
    2010 Camaro SS (Transformers Edition)

  7. #7
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Martinís springs were absolutely perfect.
    Dave

    Here, somewhere.


  8. #8
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,108

    My VIN:    10270

    Arms & balljoints sold!

    Items remaining:
    Front wheel bearings
    K&N air filter & clips
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

  9. #9
    Junior Member
    Join Date:  May 2011

    Posts:    9

    Lower arms and Uk ball joints received. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •