I have to replace my ac evap core, and unfortunately Delorean is out at the moment.
A friend sent me a link to deloreango with some available. Anyone have any experience with them?
Location: Virginia
Posts: 60
My VIN: 6989
I have to replace my ac evap core, and unfortunately Delorean is out at the moment.
A friend sent me a link to deloreango with some available. Anyone have any experience with them?
Location: Allen, TX
Posts: 68
My VIN: #4595
Arran and the team there are very solid with incredibly fast shipping. I've spent a thousands with them (as well as the other main vendors). You should have no issues.
DeloreanGo got it to me quickly and it fits perfectly. No concerns.
Jeff
#6313 (lic: DMC-EV Texas), 25k miles, 100% leather, touchpad, 100% LED, dimmable LED dash, remote door lock & Elvis mod, all A/C vents in kneepads, wedgectomy, escutcheon velcro fix, GM door chimer, custom arm rest/storage/controls...
Location: Richmond Va.
Posts: 142
I have one in Richmond from Hervey that I did not use.
Posts: 256
I just received an evap core (and heater core) from DeloreanGO. The evap core is a one to one replacement in size and shape. The only thing to note with the DeloreanGO evap core is, it does not come with the fine mesh screen on it, save the the one that's on your old core to transfer it over. It's just hot glued on so it's easy to remove and you can hot glue it onto the new one.
I have bought quite a bit from DGo. (Injectors, braided lines, fuel distributor, CPR just to name a few). Some of their parts are great, some (like their OE fuel pump) are absolute junk. Given the labor of an evaporator R+R, I would get the best money can buy because you don't want to do it again.
Last edited by Michael; 12-26-2021 at 02:08 PM.
Location: Illinois
Posts: 2,440
My VIN: 11408
Club(s): (DMWC) (TXDMC) (DCUK) (DOI)
I have the hervey evaporator core in my car and i have regretted it since day one. Luckily though it does not leak. It is significantly smaller than the stock unit, I am suspect of it affecting my AC system performance.
To echo what Michael said, this is a high labour part. I would make sure you are installing a quality unit. Some items sold by Dgo are of very poor quality. I have a history (as well as others) of blowing out bushings of theirs for example. Very scary to have happen on the freeway.
Last edited by Josh; 12-27-2021 at 01:47 AM.
Supercharged 5.3L LS4 + Porsche 6spd
[email protected]
lsdelorean.com
I am not affiliated with Delorean Midwest in anyway.
Location: Pittsburgh, PA
Posts: 504
My VIN: Yes.
Club(s): (DCO) (DMA) (DCUK)
Posts: 256