Identification Wiring locations please

[er1c]

A lot of cars don't have the capacitor...

In the 2nd pic, I'm guessing GN a (Green/Brown stripe) wire and a LGW (Light Green/White stripe) wire for the reverse light switch:

Star, thanks Ron, I am totally forgetting about the rear Fascia electrics, I have the rear fascia board off at the moment.

[er1c]

The connector is the same on both of these. Best seen in the first pic.

The first is Black and Red.

Attachment 69881

The second is light green/white and maybe Teal and brown, pic not great but if you follow the wire down its a fair bit clearer.

Attachment 69882

Just to finish this thread off.

#1 The blue and black pair of wires (with single black) actually pair with the red and black connector in the first pic which threw me totally. The green pair connector actually does have a mate, which had slipped onto the top of the engine so once pulled up that was fine.

#2 Was indeed the Otterstat.

#3 On a manual the white connectors pair with the other left empty.

#4 Ballast connector bottom left is blank as was specified.