Digital door lock module
IMG_2344.jpg
Been trying to faultfind the above module.
No led lights activate on it, its receiving power from the main big plug, and the seperate wire from the circuit breaker.
Both fuses are tested fine. Circuit board and components look fine.
In my pic above, the fuse supplied from circuit breaker red wire (top fuse in pic) receives 12v. The one on the bottom is grounded, through the big triangle shaped connector.
I have manually put 12v into the triangle connector, car side, and both door solenoids work in both directions. (Door lock unlock levers move).
Im assuming my problem is the 2nd fuse is grounded. Makes no sense to blow the ground connection.
It doesnt help that i have the remote locking kit also installed, with extra relays etc. ive now disconnected these bits but still no lights on digi door lock module. And still a grounded fuse.
Can you point me in the right direction please?