Hi!
New Delorean owner here, I've throwing myself in at the very very deep end by starting on a total restoration project (needs a frame off restoration) on a car that has been sitting for at least ten years (car is on its way over to me on a boat), so probably I'm just looking for some virtual encouragement !
For reasons (to register it, see how the mechanicals are) before I start the full restoration I need to get it "running", the engine starts with fuel direct into it and I'll be replacing everything fuel related, the fuel pump (clean the tank) , all the lines, the fuel distributor etc., here is my question: Should I just bite the bullet and replace all the injectors as part of the fuel system revamp or will some of them be ok and just swap out the bad/worse ones after a flow test?
Thanks