Hey guys. I am going to be working out a TPS solution for the factory throttle spool soon since I need one for my car. Don't get too excited, right now it's a pile of miscellaneous automotive parts and an idea, but once I get my cylinder heads back on I will start designing and exploring.
It will require disassembling the original spool and what should be a single, easy weld. Advantages include a SUPER common TPS with a standard Bosch D type shaft drive, readily available from parts houses, junkyards, and ebay (I've spotted new Bosch ones for as low as $16). It is also a three-wire unit that is known to work with MS.
Assuming (big assumption!) that it works and there's interest I am going to approach a local fabricator I trust to see if I can have what we need made in a limited quantity so that there's no welding involved, just parts swapping.
This space reserved for actual content. Figure at least two to three weeks before I update, but I'd like to gauge interest and see if I'm the only nut who thinks this would be useful.