Hi guys,
I bought a megasquirt II, v3 kit for saying goodbye to the original renault ECU
I think i will receive the kit in the next week... i started to read manuals and download software but is still a bit obscure where i have to start... i'm sure you will have suggest to what i can read first, during this days i wait
I think i will use TunerStudio.
Buy the full version, you will love the real time auto tune feature
I know i will have to test and use the "Renix 44-2-2" trigger.
I have low impedance injector, i will have to make some PWM settings...or do you suggest to use resistors ?
Make sure you have the flyback circuitry in place. There are also some settings on the injectors setup page that are a little different for low impedance.
I was planning to put in all the fixed value i know, and use my old values of fuel and timing from the other tuner program i had, i should get something working... than i should work on the things i dont know and experiment with cold enrichment, accell enrich, and all the correction.