Location: Queens, NY
Posts: 1,306
My VIN: 2964
Hi all,
I removed the entire exhaust system end of August.
As of now I have cleaned the entire engine, I fiinished painting the Valley of Deathe and the Cylinder Heads, the inside. I will do the outside.
When I removed the exhaust headers, there were threaded studs with nuts holding the exhaust headers. Some came off, some didn't. What is the best way to take them out. They are threaded studs, not bolts. I tried pliers, vice grip, but not good enough.
Billy C. VIN: 2964
"Trying to Live the Dream!"
"If you're gonna own a DeLorean, why not build it with some style?"
http://www.facebook.com/billy.chingas.7
Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
One of these:
http://www.toolfetch.com/screw-extra...a-287b-7.shtml
The only one that really works.
Originally Posted by 1batt4u
Dave S
DMC Midwest - retired but helping
Greenville SC
Location: Queens, NY
Posts: 1,306
My VIN: 2964
Cool, thanx!!
I doubt I'll find one of these around my area. I'll check online!!
Billy C. VIN: 2964
"Trying to Live the Dream!"
"If you're gonna own a DeLorean, why not build it with some style?"
http://www.facebook.com/billy.chingas.7
Location: Queens, NY
Posts: 1,306
My VIN: 2964
While googling this tool, I came across a youtube video:
http://www.youtube.com/watch?v=66ATKL4G04M
This was very helpful, and most of all VERY EASY to do!!!
I had 5 on each side, total 10 to remove. Took some time, but was easy!!!
Billy C. VIN: 2964
"Trying to Live the Dream!"
"If you're gonna own a DeLorean, why not build it with some style?"
http://www.facebook.com/billy.chingas.7
Posting Permissions
Reply With Quote