FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
My friends think I'm nuts
Originally Posted by
Jimmyvonviggle
Be good if we could use something like shrink tubing for electrical wires. If there was one wide enough we could slip over the stick then shrink.
I have some that is thick enough to go over the shifter, so it definitely exists. It came in a multi-pack of different sizes that I got at Radio Shack, I think.
-
Senior Member
Originally Posted by
DPI JOSH
We have a version coming out but it is VERY different. The one you are taking about caused an issue of the shifter being metal on metal with the gate piece. We have an insert that extends slightly past the shift gate edge so that when you move the shifter it runs against the plastic instead of the shift gate. These will be released in January after a bit of testing. I will have the first prototypes from stainless works in December.
Josh, did your SS shifter gate ever get completed??
-
President, DeLorean Industries
Upper plate yes but I have yet to machine the custom bottom section. On the short list of projects to close out.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules