Anyone know if they are going to make that shift gate again for the 5-speed? Its quite an enticing product.
Location: Near Toronto, ON
Posts: 1,211
My VIN: Previous Owner of 5875
Club(s): (DOI)
Anyone know if they are going to make that shift gate again for the 5-speed? Its quite an enticing product.
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
We have a version coming out but it is VERY different. The one you are taking about caused an issue of the shifter being metal on metal with the gate piece. We have an insert that extends slightly past the shift gate edge so that when you move the shifter it runs against the plastic instead of the shift gate. These will be released in January after a bit of testing. I will have the first prototypes from stainless works in December.
www.deloreanindustries.com Every Detail Matters
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
Can you provide an estimate on the cost yet? I had wanted DMOCO's unit, but the price was too high for my taste.
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
As I have been stating in other threads recently. I'm producing these items in quantity to help keep the price down. I should easily be sufficiently below the previous 105 mark.
Believe it or not the expense part isn't the stainless. Its water jetting the plastic rub guide.
www.deloreanindustries.com Every Detail Matters
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
Huhuhuhuhuh, 'rub guide', huhuhuhuh
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
I questioned my wording as soon as I posted that. But I'm too lazy to edit. You got that one Mike.
www.deloreanindustries.com Every Detail Matters
Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Posts: 1
let me know when avalible [email protected]
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
Upper plate yes but I have yet to machine the custom bottom section. On the short list of projects to close out.
www.deloreanindustries.com Every Detail Matters