adjusted throttle rod arm by one full turn, 1000rpm idle is now fixed. adjusted dwell just a smidge so that is is now swinging right between 40. can't complain for 10-15mins work.
adjusted throttle rod arm by one full turn, 1000rpm idle is now fixed. adjusted dwell just a smidge so that is is now swinging right between 40. can't complain for 10-15mins work.
Posts: 70
Finally finished my door lock system refurbishment...
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
1985 Chevrolet Corvette, Z51, 4+3 manual
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)
Location: Hopkins, MN
Posts: 328
My VIN: 1121
Club(s): (DOA) (DCUK)
New side markers all around (3 were cracked, 1 completely in half). Installed MT noise isolator. Refurbed my shift boot and repaired the plastic frame.
Location: atlanta, ga, usa, earth, sol, milky way
Posts: 1,088
My VIN: 2072
Club(s): (SEDOC) (DCUK)
Is this officially the longest thread on dmctalk?
Installed my new DPI Spec 1 exhaust that I bought as a christmas present for myself!
Tomorrow I hope to finish getting 2072 back on the road. Just need to reinstall the water pump and intake manifold.
Location: Comstock Park, MI
Posts: 130
My VIN: 1019
I won an award at a car show today.
just finished installing remote door lock module and door actuators relays. no scotch locks were used
20160710_013823_resized.jpg
Let us reply to ambition that it is she herself that gives us a taste for solitude.
Installed 2, 105 lumens interior lights into 11035
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Northwest Florida
Posts: 324
My VIN: Midproduction
Location: FL
Posts: 948
My VIN: Early
Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3