Yes i did. They are wiring directly into the parking lights. They are white in color.Originally Posted by Lwanmtr
Sent from my SM-N920P using Tapatalk
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
Yes i did. They are wiring directly into the parking lights. They are white in color.
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Jamul, CA
Posts: 1,499
My VIN: 07000
Neat!! Just ordered them too...Yep, forgot to mention that. I used these. No cutting or modding at all
Just the pins for low and high on the outer lights
OCTANE LIGHTING 4X6" White Led Halo Angel Eye Halogen Headlight Headlamp Bulbs Crystal Clear Set https://www.amazon.com/dp/B00GNU0TG6..._3TG9zbJ9GA835
Sent from my SM-N920P using Tapatalk
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
Haha awsome! Im sure you will love them. I know I do! Here is a better shot while darker.
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
Booyah
SDC10855.jpg
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze
Location: Jamul, CA
Posts: 1,499
My VIN: 07000
I’m sure I will. I love the 4 lights look, but have always hated the lack of good light for night driving.Haha awsome! Im sure you will love them. I know I do! Here is a better shot while darker.
Sent from my SM-N920P using Tapatalk
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
Oh God yeah! I drive my car to work when its nice at least 2 days a week, driving 164 round trip miles through 3 states and leaving at 4am till 5:30. All interstate and mountain driving! You need good lights! Going from stock to this was a very wise update!
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
Where is the back of the frame?
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
It gets removed to fit in the LS. You can't physically install it without doing so. Once the motor is in, it gets bolted back into place with reinforcement plates which makes the rigidity quite a bit stiffer than the car is normally.
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
I dont remember the frame being removable. Just looked at my old pic of the back end off my car and its welded in place.
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Reedsburg, WI
Posts: 4,026
My VIN: 5180
Club(s): (DMWC) (DCUK)
It is Welded in normally, but in this installation it will get bolted back into place so that it remains removable for future accessibility.
DENNIS
VIN 5180, Frame 3652, STAGE II, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.
Posting Permissions
Reply With Quote
