adjusted throttle rod arm by one full turn, 1000rpm idle is now fixed. adjusted dwell just a smidge so that is is now swinging right between 40. can't complain for 10-15mins work.
Location: Fairfax, VA
Posts: 246
My VIN: 4055
Club(s): (DMA)
adjusted throttle rod arm by one full turn, 1000rpm idle is now fixed. adjusted dwell just a smidge so that is is now swinging right between 40. can't complain for 10-15mins work.
Posts: 65
Had a miss---found #2 cyl spark plug boot burned against the header (327 chevy engine)---replaced boot--OK now. Added 1200 degree protective insulating boots to plug wires---hopefully problem solved.Originally Posted by novadmc
Location: Florida
Posts: 2,371
My VIN: <2000
Club(s): (DCF)
Finally finished my door lock system refurbishment...
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
1985 Chevrolet Corvette, Z51, 4+3 manual
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)
Location: Hopkins, MN
Posts: 328
My VIN: 1121
Club(s): (DOA) (DCUK)
New side markers all around (3 were cracked, 1 completely in half). Installed MT noise isolator. Refurbed my shift boot and repaired the plastic frame.
Location: atlanta, ga, usa, earth, sol, milky way
Posts: 1,088
My VIN: 2072
Club(s): (SEDOC) (DCUK)
Is this officially the longest thread on dmctalk?
Installed my new DPI Spec 1 exhaust that I bought as a christmas present for myself!
Tomorrow I hope to finish getting 2072 back on the road. Just need to reinstall the water pump and intake manifold.
Location: Comstock Park, MI
Posts: 130
My VIN: 1019
I won an award at a car show today.
Posts: 520
just finished installing remote door lock module and door actuators relays. no scotch locks were used
20160710_013823_resized.jpg
Let us reply to ambition that it is she herself that gives us a taste for solitude.
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
Installed 2, 105 lumens interior lights into 11035
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Northwest Florida
Posts: 324
My VIN: Midproduction
Where did you get these bad boys? I have LEDs in mine, but they're pretty weak.
Installed 2, 105 lumens interior lights into 11035
Sent from my SM-N920P using Tapatalk
Location: FL
Posts: 948
My VIN: Early
Damn, those are very bright!
Installed 2, 105 lumens interior lights into 11035
Sent from my SM-N920P using Tapatalk
Now I'll have to get myself a pair...
Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3
Posting Permissions
Reply With Quote
