Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
You know I actually do not know but I'm going to have to check because you got me curious and I'll find out when I get home but I can tell you they are a lot thicker than what was on thereOriginally Posted by BABIS
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Fairfax, VA
Posts: 246
My VIN: 4055
Club(s): (DMA)
nice going! i really gotta get serious about buying my suspension parts.... i've got parts analysis paralysis.And last night, got the passenger front done. By the weekend, we should have all 4 corners taken care of.
Location: Northern Virginia, near Washington DC.
Posts: 214
My VIN: 5470
Yeah, my budget didn't really allow me too many choices. It was either buy cheap new, or buy good used, and I went with the latter.
Got the rear drivers side in tonight. Thought I could do both rears in one evening, but things were corroded more than I thought. Might have the other side done before Dulles C&C. Not sure if I'll have time to go or not.
Location: Reedsburg, WI
Posts: 4,026
My VIN: 5180
Club(s): (DMWC) (DCUK)
It's nice to have better brakes. However, if you've ever seen the the video of what the the LCAs go through when the brakes are applied I would also suggest you upgrade the LCA's with heavier versions and add LCA support braces.
Sent from my iPhone using Tapatalk
DENNIS
VIN 5180, Frame 3652, STAGE II, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.
Location: UK
Posts: 207
My VIN: 4494
Club(s):
Rear cross-member refitted after powder-coating, heater hoses re-fitted, new spark plugs gapped and fitted, new distributor cap and rotor arm fitted.
Location: Massachusetts
Posts: 65
Does anyone know who's BTTF Delorean was at the Oscars with Michael J. Fox???
Location: Stevens Point,WI
Posts: 2,471
My VIN: 6125
Responded in the BTTF thread here:
http://dmctalk.org/showthread.php?11...l=1#post214131
Location: Bunker Hill, West Virginia
Posts: 724
My VIN: 11035
Got my Wilwood calipers for my rotors today
Sent from my SM-N920P using Tapatalk
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Location: Lansing, MI
Posts: 490
My VIN: 04194: 5-Speed, Black Int, 79 Peugeot 604 Manifold, 05052: 5-Speed, Gray Int, 78 Peugeot 604 manifol
Installed new outer door seals on 4194 and installed a passenger door sill negative on 5052.
Tomorrow night I'm rebuilding 4194's rear brake calipers.
Andrew
4194 Since 7/98
5052 Since 7/14
1972 Buick Riviera
1974 Bricklin SV-1 177
1982 AMC Eagle SX/4 (4.2 I6, 4 Speed)
1983 Pontiac Trans Am (Knight Rider Conversion in progress)
1985 Oldsmobile Toronado (daily driver)
Solex carb and antenna television guru.
"My carbon footprint is bigger than yours!" :-)
Location: Lansing, MI
Posts: 490
My VIN: 04194: 5-Speed, Black Int, 79 Peugeot 604 Manifold, 05052: 5-Speed, Gray Int, 78 Peugeot 604 manifol
On Tuesday and Wednesday nights I rebuilt 4194's rear brake calipers. In addition to rebuilding the calipers, I also replaced the bridge pipes. I also reconnected a handbrake cable which had disconnected from the bracket on the handle.
Next week I'm planning on replacing all of 4194's coolant and heater hoses.
Andrew
4194 Since 7/98
5052 Since 7/14
1972 Buick Riviera
1974 Bricklin SV-1 177
1982 AMC Eagle SX/4 (4.2 I6, 4 Speed)
1983 Pontiac Trans Am (Knight Rider Conversion in progress)
1985 Oldsmobile Toronado (daily driver)
Solex carb and antenna television guru.
"My carbon footprint is bigger than yours!" :-)
Posting Permissions
Reply With Quote
