What have you done to your DeLorean today?

[Christian Dietrich]

Mind sharing what you got from Amazon specifically?

Thanks,

Greg

Here ya go Greg. You have to order two sets for the 4 headlights since 2 come in a box. You also have to switch your low beam wire and high beam wire at the connector. Its simple.
Win Power H4(HB2/9003) LED Hi-lo Beam Headlight CREE Bulbs Conversion Kits + Canbus (1 Pair)-2 Year Warranty https://www.amazon.com/dp/B01L91AQAC?ref=yo_pop_ma_swf

Sent from my SM-N920P using Tapatalk

[Timebender]

Here ya go Greg. You have to order two sets for the 4 headlights since 2 come in a box. You also have to switch your low beam wire and high beam wire at the connector. Its simple.
Win Power H4(HB2/9003) LED Hi-lo Beam Headlight CREE Bulbs Conversion Kits + Canbus (1 Pair)-2 Year Warranty https://www.amazon.com/dp/B01L91AQAC?ref=yo_pop_ma_swf

Sent from my SM-N920P using Tapatalk

Awesome. Thanks!!

[Christian Dietrich]

Awesome. Thanks!!

You're quite welcome my friend

Sent from my SM-N920P using Tapatalk

[Timebender]

Here ya go Greg. You have to order two sets for the 4 headlights since 2 come in a box. You also have to switch your low beam wire and high beam wire at the connector. Its simple.
Win Power H4(HB2/9003) LED Hi-lo Beam Headlight CREE Bulbs Conversion Kits + Canbus (1 Pair)-2 Year Warranty https://www.amazon.com/dp/B01L91AQAC?ref=yo_pop_ma_swf

Sent from my SM-N920P using Tapatalk

I’m guessing you had to get new housings too- is that in an earlier post?

[Christian Dietrich]

I’m guessing you had to get new housings too- is that in an earlier post?

Yep, forgot to mention that. I used these. No cutting or modding at all
Just the pins for low and high on the outer lights
OCTANE LIGHTING 4X6" White Led Halo Angel Eye Halogen Headlight Headlamp Bulbs Crystal Clear Set https://www.amazon.com/dp/B00GNU0TG6..._3TG9zbJ9GA835

Sent from my SM-N920P using Tapatalk

[Lwanmtr]

Here ya go Greg. You have to order two sets for the 4 headlights since 2 come in a box. You also have to switch your low beam wire and high beam wire at the connector. Its simple.
Win Power H4(HB2/9003) LED Hi-lo Beam Headlight CREE Bulbs Conversion Kits + Canbus (1 Pair)-2 Year Warranty https://www.amazon.com/dp/B01L91AQAC?ref=yo_pop_ma_swf

Sent from my SM-N920P using Tapatalk

Can you be specific? Switch them in what way?

[Christian Dietrich]

Can you be specific? Switch them in what way?

The pins in the factory connector. The outer lights run the low and high beam. I forget the colors of the wire but you'll see the black wire which is your ground to switch those two around or if you're not certain use a test light or a digital multimeter and just disconnect a pain and swap the terminals of the high beam in the low beam and you leave the ground where it's at and that's all you have to do.

Sent from my SM-N920P using Tapatalk

[Lwanmtr]

Ahh ok, sounds simple enough. Thanks

[Christian Dietrich]

Ahh ok, sounds simple enough. Thanks

Sure no problem

Sent from my SM-N920P using Tapatalk

[Lwanmtr]

Did you wire the halo part to come on with the lights?