I finished installing the DPI steering shaft and u joints. Between this and the DeLorean Go strut tower brace the car feels much nicer on the road.
41D6E11F-EEFE-40D7-BC68-D5FCA0B28C82.jpg
Posts: 743
I finished installing the DPI steering shaft and u joints. Between this and the DeLorean Go strut tower brace the car feels much nicer on the road.
41D6E11F-EEFE-40D7-BC68-D5FCA0B28C82.jpg
Posts: 93
Click image for video.
1981 DMC 12- Black
VIN 46**
Alameda CA
Location: Leonardtown, MD
Posts: 9,003
My VIN: 03572
Looks like they flash a little when first turned on.Originally Posted by gluaisrothaii
Click image for video.
Location: Burnsville MN-Moving to Kalispell MT. in June 20111
Posts: 886
My VIN: 2691
Because there is no snow on the ground wife and I
took a drive through town to thrill the troops. Doesn't
look like a white Christmas this year...very unusual...
Posts: 93
I installed a flasher module in the light for additional conspicuity.....
Last edited by gluaisrothaii; 12-20-2019 at 01:06 PM.
1981 DMC 12- Black
VIN 46**
Alameda CA
Location: Virginia Beach, Virginia
Posts: 520
My VIN: 5312
Ordered the flange kit and 2 new cv axles, because one boot i ripped and id rather replace them all at once because im lazy.
- OCT81 DeLorean DMC-12 Vin 5312 "DeLores"
- 1978 Lotus Esprit S2 "Problem Child"
- 1995 Mazda Miata Turbo "Happy Daily Driver"
I repair Lotus's with DeLorean parts
Posts: 93
1981 DMC 12- Black
VIN 46**
Alameda CA
Location: Spokane
Posts: 128
My VIN: 5051
Completed installing a new passenger door! PITA job! And just 2300 bucks. Stupid shopping carts!
Location: Fresno, CA
Posts: 237
My VIN: 10353
Randomly picked up some Ford plastic trim fasteners at auto parts store and finally fix my passenger door roof panel. It always was a bit loose. Had to make a slight modification to the fasteners but now they work perfectly.
Posts: 4,764
My VIN: Banged your VIN'S mom
Almost every night this week I have been under the hood doing minor service, sprucing up, and detailing. Tonight I am done with the engine bay, on to the undercarriage where I will be quite busy with new pads and refreshed rotors, fluid and filter changes, and more waxing the frame.
I did redo the intake piping. I got new parts at the local parts store and fitted a flange on the pontoon to give the assembly a nice finished look. I was never happy with the air cleaner side either, I picked up an adapter with just a sprinkle of rice. New plugs, fresh clean and oil of the K&N filter, new idler bearings and repainted brackets, new belts, new rebuilt and cleaned alternator, and complete detail of the engine, timing cover, block and bay. I do have a nice new plated hose bracket since I polished all the zinc off the old one but I will change it when I replace the coolant.
20200103_181044.jpg
20200103_181111.jpg
20200103_181136.jpg
20200103_181056.jpg
Last edited by Michael; 01-03-2020 at 06:53 PM.
Posting Permissions
Reply With Quote
Dave M vin 03572