FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
LS1 DMC
Originally Posted by
knightjp
Was watching Wheeler Dealers recently and they were doing an Alpine A310; the car from which the Delorean got its engine and transmission from. What they did to get more power was to have a kit made that would replace the existing manifold and carb setup with a Holley 4 barrel. It involved having a manifold machined with a special adapter plate.
Would that help Delorean PRVs get more power??
There are several people with carbureted DeLoreans, but the power output is pretty much the same. Nothing really changes but the fuel delivery method; you're still getting the same amount of air and fuel into the cylinder. If you want to increase the power you have to either change how much air and fuel are going in, modify the compression, change displacement, modify cam and ignition timing, etc.
If you're interested in carbed DeLoreans, then this is the place for you:
http://dmctalk.org/forumdisplay.php?54-Carb
-
Senior Member
Originally Posted by
Nicholas R
There are several people with carbureted DeLoreans, but the power output is pretty much the same. Nothing really changes but the fuel delivery method; you're still getting the same amount of air and fuel into the cylinder. If you want to increase the power you have to either change how much air and fuel are going in, modify the compression, change displacement, modify cam and ignition timing, etc.
If you're interested in carbed DeLoreans, then this is the place for you:
http://dmctalk.org/forumdisplay.php?54-Carb
Your car has a LS1 in it.?!
How is it? Does it handle well?
-- Julz
-
Member
I really really want to do a Honda J32 swap in my Delorean
-
LS1 DMC
I believe that's the same engine tommyrich put in his car. You should contact him if you really are interested in that swap.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules