guys, I just got the front frame extension to replace my rusty one. The top right tab on it has a radius cut out. Does anyone know why? It doesn't seem right to me
guys, I just got the front frame extension to replace my rusty one. The top right tab on it has a radius cut out. Does anyone know why? It doesn't seem right to me
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
That is not right at all. That is not how we receive them from the supplier.
www.deloreanindustries.com Every Detail Matters
Location: Orlando, Florida
Posts: 2,734
My VIN: 01643
Club(s): (DCF) (DCO) (DCUK)
Yea that doesn't look right.
Here's what mine looked like before I installed it:
I seem to remember a clearance problem with the coolant pipes up there when I replaced my coolant pipes. I bet that is a modifcation they came up with.
Dave M vin 03572
http://dm-eng.weebly.com/
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
Coolant tube crosses on the outside and usually hits the bolt for the right radiator bracket. Never seen issues there.
www.deloreanindustries.com Every Detail Matters
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Previously Ireland, now New Jersey
Posts: 353
My VIN: 4 Seater DMC24
Club(s): (DMA)
It looks like a mod to reduce interference with a steering u-joint - especially if using an aftermarket one which might be bigger than stock. The only issue is that it is on the wrong side of the frame for this - unless its for a RHD car?