Hi everyone,
I am trying to get the "automated" door locks to work -- when you lock the driver side, the passenger side unlocks etc. Using the colored wiring diagram, I managed to stumble upon the door lock relay in the car. However, there is a switch of some sort next to it that I can't make heads or tails of.
Here's a picture of the relay and switch:
2011-06-07_22-15-44_9.jpg
The red circle is the one I don't know what it is. I'm guessing it's the door lock thermal trip based on the brown wire going into it. The small red wire I think is from the driver side of the car, and there are two open spots. Does anything go here? If so, is it the big red wire (with a green arrow next to it at the bottom of the picture?) that comes out of the door lock relay?
I have tried to plug in the red wire into both spots and try the locks, but to no avail. Am I barking up the wrong tree to get the locks to work?