Posts: 1,313
My VIN: 03238 Grey & Black Hybrid - Auto - work in progress Former owner 10902 - Universal 93 Raffle Car
OK, lets see if I understand what I'm seeing in section 4.2
Is this saying that if, for example, the ambient temperature is 100 degrees F, that the optimum high side pressure is 124 PSI? Seems high.
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Parker, TX
Posts: 731
My VIN: #1283
Club(s): (SCDC) (DCUK)
I am a former Application Engineer and Lab Manager with Sanden. After extensive testing with R134as retrofitted AC systems on test benches, in wind tunnels and on-the-road testing way back in 1990 - 1992 I presented Sanden's findings in a Society of Automotive Engineering paper in Detriot the following year. That's when R-12 to R134a retrofitting was a glowing hot topic.
Section 4.2 is a "bottomline" summary of that study so I am intricatally familiar with this topic and I will be happy to answer any related questions anyone may have.
BTW, I converted #1283 to R134a four years ago. For the compressor I used a drop-in Sanden SD7H15 replacement for the OEM R-12 SD-510. No bracket or hose connection mods were needed.
Great. Glad to have you aboard. I installed the SD5H14 on my car. I know this has less capacity then your SD7H15 but it seems to cool my car fine.
What are your thoughts on the VOV orifice? I was running one but went back to the standard orifice and it seemed to work better then the VOV.
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Parker, TX
Posts: 731
My VIN: #1283
Club(s): (SCDC) (DCUK)
Yes, the SD5H14 is slightly smaller in displacement but if you use a smaller clutch then it will turn faster. The 7H does have a slightly better volumetric efficiency but they are both fully capable of cooling well in a D. I like the 7H because it is newer design and is quieter (7 cylinders instead of 5, helical internal gears instead of straight) etc. And, the 7H is made in Wylie, TX. Last I heard the 5H production line was sold off to some company in Asia....
The variable orifice is something that came along after I left the industry. It is supposed to provide better cooling at idle. I have one installed in my D but I really have no frame of reference to compare to my old (and not so well colling) R-12 system.
Location: Parker, TX
Posts: 731
My VIN: #1283
Club(s): (SCDC) (DCUK)
The Delorean stock compressor is an SD-510Q8494 where :
- the 5 designates 5 cylinders
- the 10 stands for 10 cu in displacement per revolution
- Q is the type of cylinder head
- 8494 defines the combination of mounting, clutch size, offset, oil amount etc.
- this compressor used to be made at Sanden's old plant in Dallas, TX but is no longer in production (mostly because it was unable to withstand the higher pressures and loads/less efficient lubrication associated with R134a)
A perfect R134a drop-in replacement would be the Sanden SD7H15QC4708:
- the 7 designates 7 cylinders
- 15 stands for 155 cc displacement per revolution (about 9.5 cu in)
- this is a quieter, more durable compressor, specifically for R134a
- this compressor is produced in Wylie, TX
- I use this compressor on my D.
See attached drawings for both.
Henrik
former Application Engineer and Lab Manager at Sanden
Attachment 17829 Attachment 17830
Location: Glen Rock, PA
Posts: 453
My VIN: 02075
Club(s): (DMA)
Is there a guideline for how much oil to ad for R12 into the SD-510 (stock) compressor after servicing the unit? All of the instructions say to run the compressor at certain RPM before evacuating the system & removing/draining the compressor. What if the system is non-operational & you can't run the compressor prior to draining it?
Is there a straight-forward "drain well & put X ounces of oil in" procedure?
______________________________________________
Justin Mettee
VIN 02075
DMC-CA cams & custom Flowmaster muffler
1/4 mile time - 16.792s @ 81.45MPH
You run it so each componet holds the amount of oil it will hold normaly. If it had been running good and you only changed one componet then add that amount (shown in the document) for that component.
Best to use the dip stick check but that is only after it has been running so you would need to evac and refill.
Dave M vin 03572
http://dm-eng.weebly.com/