Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
SP10663 are repro screws in the correct length with phillips heads.Originally Posted by Accipiter
SP10660 is longer but has the OE head style, (not phillips). Way cheaper too. Just be sure to use antiseize on them!
Common hardware store (shiny plated) screw size is M5 x 15.
Dave S
DMC Midwest - retired but helping
Greenville SC
Posts: 841
High Heat Driving Tests?
Has anyone run these in high temps, like the last week for example?
My pump never sounded louder and scarier than the other night while driving in 100 + temps with lower fuel level.
I was just curious how these are holding up in the heat and if they make their presence known....
Location: Olathe, KS
Posts: 1,680
My VIN: 11596
Yup, I drove up here and it was over 90 and humid. Didn't detect any change in pump sound. So far it's working great.
Andy Lien
VIN 11596 Jan 1982 build - owned since Nov. 2000!
Total frame-off restoration completed 2021-2023
Photography and Backpacking is life.
Was Fargo, ND
Now Kansas City
Location: Leonardtown, MD
Posts: 9,008
My VIN: 03572
That's what I like to hear. Keep the comments posted of your high temp long drives. Also note how low you let the tank get.
Location: DeLorean Cars, UK
Posts: 592
Are you referring to Pozidrive as opposed to Phillips?
Martin Gutkowski
-------------
Very part time DeLoreaner...
Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
I wasn't sure that DMC used Pozidrive as opposed to some more obscure phillips-like head, but yes, that's what I meant.
Dave S
DMC Midwest - retired but helping
Greenville SC
Location: DeLorean Cars, UK
Posts: 592
Wait.... there are more?!?!?!
I buy stainless M5 x 16mm pan-pozidrive screws for the under bonnet area.
Martin Gutkowski
-------------
Very part time DeLoreaner...
Posts: 434
My VIN: Formerly 10570 and 6776
Club(s): (AZ-D) (DMA) (SCDC) (DCUK)
Good news...this part is now available for online ordering:
http://store.delorean.com/p-10569-fu...er-module.aspx
Bad news...we're sold out IN TEXAS at the moment and will not be re-stocked until the last week of July.
Contact your local dealer - many of them may still have this item on their shelves for immediate delivery.
James
Location: Sacramento-ish
Posts: 4,408
My VIN: 02100
Club(s): (NCDMC) (DCUK)
Awesome James! But more bad news - the link on the product page to download the instructions is broken. I really wanted to read it
Jon
1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
restoration log, March 2011 to present
full and detailed photo restoration log
Posts: 434
My VIN: Formerly 10570 and 6776
Club(s): (AZ-D) (DMA) (SCDC) (DCUK)
Reload and try again. Works here...
James
Posting Permissions
Reply With Quote
Dave M vin 03572
