Im still trying to find out who did the holder in the coin tray area from the old talk .com it did not come from DMCCA cause they thought it was pretty cool too
Proto where are you at with your "prototype" holder?
I picked up a couple of these. I inserted the very flexible metal strips under the center console plate around the shifter. No drill holes or adhesive residue.
Dave, don't forget the IV bag along with your funnels and catheters. I put these on my Honda Goldwing and was able to travel 1000 miles without stopping. Beats depends.
Im still trying to find out who did the holder in the coin tray area from the old talk .com it did not come from DMCCA cause they thought it was pretty cool too
Proto where are you at with your "prototype" holder?
Ummmm, errrrr, ahhhh, welll.
I've got a great prototype. Will mount same as original tray (just two screws), removable cup inserts (easy cleanup for spills) etc. etc. But right now, the prototype is smooth. I wanted to be able to cast it with the vinyl grain so that all it would need is to be dyed black or grey and would match the console. Haven't found a good way to get the grain on it though. Casting it smooth, then wrapping it in vinyl would be a pain so I haven't cast the mold. Open to suggestions.
The easiest and cheapest way to make cup holders in the D is to use the stock cup holders that came with the car - that everyone has.
The space between the seat back and the pontoon near where the seat belt bolts to. It easily holds one or two 20oz screw on cap bottles. It can also hold the drive thru cups as long as you don't get the "super suck" size. Normal aluminum cans fit as well but are not tight so they may spill.
Shannon Y www.ohiodeloreans.com www.facebook.com/ohiodeloreans
---
1st angle drive - 58,027 miles (20 years) -- original
2nd angle drive - 48,489 miles (21 years) -- original from donor
3rd angle drive - 26,572 miles (2 years 3 months) -- DMCH
4th angle drive - 21,988 miles (1 year 11 months) -- DMCH
5th angle drive - 7,137 miles (10 months 2 days) -- DMCH
6th angle drive - OVER 113,704 miles and counting (OVER 13 yr 1 month & counting) -- new Martin Gutkowski unit
over 245K miles