FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
DMC Texas 800-872-3621 or +1-281-441-2537
Once again, we're bringing our key cutting machine, key blanks and the decoder person (me) to DCS in Dayton so if you want to get a key "copy cut" or if you want your key decoded and a first generation key cut, make sure that you stop by the vendor displays on Saturday. If you're not bringing your car to DCS, then make sure you bring your keys!
-
Are you doing keys for the 2 key cars too? If so, I'd like a set at DCS.
-
-
DMC Texas 800-872-3621 or +1-281-441-2537
Originally Posted by
Flicky
Are you doing keys for the 2 key cars too? If so, I'd like a set at DCS.
We will ONLY be cutting/decoding the later style "one key system" keys at the show. We're seeing more failures of the early style locks and encourage everyone who's not "concours" to consider converting the the later system, just as the factory did in 1981.
Originally Posted by
NightFlyer
SWEET!
Questions:
1) I'm presuming that you'll be offering the molded reproduction blanks. Will you also be offering generic blanks for this key (ie Ilco, Curtis, etc)?
This is the key we will be offering, yes. We offer no generic blanks for this key as they are readily available on eBay and even locally for most people.
Originally Posted by
NightFlyer
2) Will you also be offering the NOS door key (for the two key system) in partial form (without the guts or cover)? Will you be offering generic blanks for this key (ie Ilco, Curtis, etc)?
Thanks, and looking forward to patronizing this service at the show
There are no NOS early style door keys, and we don't have the equipment to cut these, in any case. With these early style blanks being fairly common on Ebay and locally, we don't carry them at all.
Last edited by DMCH James; 06-02-2014 at 11:15 AM.
Reason: fix quotes
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules