FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 6 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 52

Thread: DMCH Reproduction Fiberglass Front Facia

  1. #11
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,382

    My VIN:    16409

    Quote Originally Posted by Dangermouse View Post
    On the second pic it looks like there are lines on the top face of the fascia. I assume that is just a trick of the light?
    Yes It's just the way the light is hitting the facia.


    Quote Originally Posted by DrJeff View Post
    Chris... Do you know the color codes/instructions that the shop used to paint the facia. It has that metallic/shine that I'd like to get replicated.
    I'll see if I can find out. As I mentioned, they matched the color from the rear facia and what was left over from the old front one.

    The guy who worked on it was very skilled. I had some fiberglass body damage that he also repaired. The shop I used was very eager to work on the car. They weren't afraid to take on the job. They were thrilled when I showed them where to get all the parts. I have to give a shout out to Toby at DMCNW. He coordinated everything with the body shop and Houston. He was extremely helpful throughout the process, and I'm glad he got credit for the sale.
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  2. #12
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Really great looking fascia. They did a nice job for sure. I'm hoping to see the rear ones in fiberglass one of these days, since they are almost always 'smiling'
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  3. #13
    Senior Member
    Join Date:  May 2011

    Posts:    841

    Quote Originally Posted by Chris 16409 View Post
    Here are some pictures with the facia fitted and my car back in my garage!
    Looks great! Next time you are outside, would you mind taking some more photos?

    Also, any side photos of the area below the black part of the bumper where it meets the fender?

    thanks!

  4. #14
    DMC Texas 800-872-3621 or +1-281-441-2537 DMCH James's Avatar
    Join Date:  May 2011

    Posts:    434

    My VIN:    Formerly 10570 and 6776

    Club(s):   (AZ-D) (DMA) (SCDC) (DCUK)

    Sales have been so good on these fascias that our supplier is now keeping at least two on hand at all times, rather than building to order. This should mean that you can order one at any time and have it drop shipped immediately to you.

    http://store.delorean.com/p-9689-front-fascia.aspx

    The car looks great, Chris - thanks for posting the photos.

    James
    James Espey, President
    DeLorean Motor Company (Texas)
    http://www.lcassicdmc.com

  5. #15
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,382

    My VIN:    16409

    Here are some additional photos of the new facia. It's a bit dirty.
    Attached Images
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  6. #16
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by Chris 16409 View Post
    Here are some additional photos of the new facia. It's a bit dirty.
    Looks really nice.
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  7. #17
    Guy with a DeLorean Mark D's Avatar
    Join Date:  May 2011

    Location:  Stevens Point,WI

    Posts:    2,470

    My VIN:    6125

    The fit and finish looks excellent! Someday I want to get one of these....

  8. #18
    Senior Member Fluxat88MPH's Avatar
    Join Date:  May 2011

    Location:  Dayton, Ohio

    Posts:    111

    facia

    Get that color code info yet?

  9. #19
    Senior Member Fluxat88MPH's Avatar
    Join Date:  May 2011

    Location:  Dayton, Ohio

    Posts:    111

    Quote Originally Posted by Fluxat88MPH View Post
    Get that color code info yet?
    Still out there?

  10. #20
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,457

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    I don't know if its what you're looking for, but some people in France used this one:
    TOYOTA Warm Grey N°165
    Hope this helps.

Page 2 of 6 FirstFirst 1 2 3 4 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •