Results 1 to 3 of 3

Thread: How To: Bench bleed a brake master cylinder

  1. #1
    Moving on DMage's Avatar
    Join Date:  May 2011

    Location:  Orlando, FL

    Posts:    64

    My VIN:    Formerly 10084

    Club(s):   (DCF)

    How To: Bench bleed a brake master cylinder

    How to bench bleed in several easy steps (previously posted by Mike):

    Bench bleeding basically gets all the little air pockets out of the master cylinder before you install it. It can also remove a bunch of fine particles of debris that may be left over from assembly/re-manufacturing, etc.

    Tools you will need:

    1. Bench Vise
    2. Screw Driver
    3. Brake fluid reservoir cup
    4. Brake fluid catch cup (may or may not come with fittings, depends on where you buy it. If not, not really important...just use a big gulp cup...do not use a super big gulp cup...that would just be silly).

    Supplies:

    Brake fluid
    Muscles



    1. Open the package your new MC comes in. Unwrap and discard packaging.

    2. Place your MC in the vise. Tighten vise. Make sure you still have access to the outlets.

    3. Install your stock fluid reservoir. This is so you can put brake fluid in...duh.

    4. Once you have installed the reservoir, place your catch cup reservoir under the outlets.

    5. Fill the fluid reservoir.

    6. Take your long screw driver, and push the plunger located in the back of the reservoir so it acts as a brake pedal being pushed. You should see a crap load of bubbles and some fluid. Keep refilling your fluid and keep using your screw driver til all you get is pure fluid.

    7. Install your MC.

    8. Buy Mike a box of popsicles.
    -Derek

    http://www.deloreanreborn.com
    http://www.deloreanclubfl.com - Florida's home for DeLorean owners and enthusiasts!

    Tesla Model S 2013 P85+ | Grey Metallic | Black Performance Interior | Pano | Carbon Fiber Decor | Dual Chargers | Tech Package | Smart Air Suspension | Ultra High Fidelity Sound | Rear Facing Seats --- Added: CF Spoiler | Front Camera Kit | Yacht Floor

  2. #2
    Senior Member Nuclearbacon's Avatar
    Join Date:  Jun 2012

    Location:  Santa Cruz, Ca

    Posts:    193

    My VIN:    10588

    Club(s):   (NCDMC) (DCUK)

    Where would you like said Popsicles sent?

    Thank you!
    -Luigi-
    Thank you ALL for your patience and your tremendous help!

    1982 VIN#10588 Build Date Dec '81

  3. #3
    Not a DeLorean Guru
    Join Date:  May 2011

    Location:  Rochester, NY

    Posts:    1,961

    My VIN:    01049

    Mmmmm, bacon
    -Mike
    1981 DeLorean, heads/cams/exhaust, EFI
    1999 Corvette, heads/cam/exhaust, 440 BHP
    2005 Elise, stock
    2016 Chevy Cruze

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •