Washer fluid cap

[stevedmc]

Either a hose has become disconnected or my bottle has cracked. Looks like another trip under the car to unbolt that box again. I see that they are no longer available at DMCH if it proves to be the bottle itself.

Steve Rice seems to remember someone recovering their cracked coolant reservoir in fiberglass. Steve Rice didn't think it was a good idea for something that holds hot coolant but this could be a good idea for a cracked washer fuild bottle. You would only need to purchase a $10 fiberglass kit from Walmart to try it.

[Mark D]

I fixed my cracked bottle very easily with a small piece of plastic cut from a milk jug and a heat gun. The washer bottle is made of the same plastic (high density polyethylene) so you can melt weld a patch over the crack. I had pics back on .com, I'll try to dig them up and post here.

[dmc6960]

I fixed my cracked bottle very easily with a small piece of plastic cut from a milk jug and a heat gun. The washer bottle is made of the same plastic (high density polyethylene) so you can melt weld a patch over the crack. I had pics back on .com, I'll try to dig them up and post here.

Good ol' HDPE #2.

[Mark D]

Crack repair thread here:
http://dmctalk.org/showthread.php?52...4557#post74557

[ed uding]

We have fount a old stock with new washer fluid caps.
Cost include shipping is €9,00 / $12,00