Sounds like you need to top up this
Location: Adelaide
Posts: 943
My VIN: 6679
Sounds like you need to top up this
Chris
Location: Mosinee, Wis.
Posts: 632
My VIN: 00778 and Formerly 06770.
I knew I forgot something!!Originally Posted by Tillsy
Sounds like you need to top up this
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
I bought Dave's led board a few months ago and I need to install it.
On the installation instructions, if I'm not mistaken it says that we need to remove the entire center console?
Do we really need to remove them entirely?
Even if its still in place we should be able to access all the wires I think?
I didn't saw any picture of all the wiring in this thread.
Does someone took pic during the all the process of the installation please?
Thank you for any help/advice.
Posts: 4,764
My VIN: Banged your VIN'S mom
No, just the top armrest piece/shifter housing that slides in the center console. I had to remove mine to notch it so the edge wouldn't touch the board. I also think I put some protective foam rubber strips just to make sure nothing grounded against it.
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
All right, thank you
Location: Leonardtown, MD
Posts: 9,003
My VIN: 03572
A few people have done the wiring without removing the console. I've removed mine a few times so I think that effort was less than trying to see behind that center metal plate. Maybe if your radio pulls out easy that may work.
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Ok, then I'll see if that's easy without removing it, however I'll remove it, thanks.
Posting Permissions
Reply With Quote
Dave M vin 03572