FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 24

Thread: Recommended Mechanics in ATL

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    formerly known as Buckshot
    Join Date:  Nov 2012

    Location:  Locust Grove, GA

    Posts:    32

    My VIN:    Currently 10231 Formerly 3991

    Club(s):   (SEDOC) (DCUK)

    Recommended Mechanics in ATL

    Anyone with any recommendations for a reputable mechanic with Delorean experience? A guy named Sal (who currently works at Hennessey Lexus of Gwinnett) and was a mechanic that worked on Deloreans when they were sold new at Spring Toyota in the '80s, recommended Zen Motors in Buford.

    I've spoken to the guys at Zen Motors on the phone and they were very professional and confident in their abilities although they have yet to work on a Delorean. Before I commit to scheduling and arranging the work (and before being the first Delorean they see), I was curious if anyone in the ATL had other advice. The specific work I'm looking to have done is fuel system related. New pump, accumulator, clean the tank....

    Cheers,
    Chris

  2. #2
    Builder of the first Delorean Time Machine
    Join Date:  May 2011

    Location:  atlanta, ga, usa, earth, sol, milky way

    Posts:    1,088

    My VIN:    2072

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by Chris3991 View Post
    Anyone with any recommendations for a reputable mechanic with Delorean experience? A guy named Sal (who currently works at Hennessey Lexus of Gwinnett) and was a mechanic that worked on Deloreans when they were sold new at Spring Toyota in the '80s, recommended Zen Motors in Buford.

    I've spoken to the guys at Zen Motors on the phone and they were very professional and confident in their abilities although they have yet to work on a Delorean. Before I commit to scheduling and arranging the work (and before being the first Delorean they see), I was curious if anyone in the ATL had other advice. The specific work I'm looking to have done is fuel system related. New pump, accumulator, clean the tank....

    Cheers,
    Chris
    I'd ask around for a reliable volvo mechanic. Some old school Porsche mechanics may also be familiar with K-Jet.

    Are you bringing a sitting car back to life?

  3. #3
    Senior Member DL4567's Avatar
    Join Date:  May 2011

    Location:  GA

    Posts:    774

    My VIN:    5302

    Club(s):   (SEDOC) (DCUK)

    I can recommend a good general mechanic in Suwanee. I've had things like wheel bearings, balancing, and A/C charging done on my DeLorean there and they are very careful and do good work. It's a small shop owned and run by 2 guys, and they do all the work themselves. I know Suwanee is far from you, so let me know if you're interested.

    Whatever you do, don't take it to American Resto Mods in Buford.
    Derek L
    VIN 5302

  4. #4
    Senior Member Jimmyvonviggle's Avatar
    Join Date:  Jun 2011

    Location:  Calgary

    Posts:    982

    My VIN:    3028

    If they have never seen a DeLorean before you are asking for trouble. There is no way a regular mechanic will be able to tackle the quirkiness . Factor what it will cost in extra hours for them to experiment, the chance of them fucking it up. For example changing the fuel filter seems pretty straight forward, but if you over crank and snap those hard lines, you are in big trouble and suddenly you are facing a big repair. I would either invite some experienced owners over, and pay them in beer (or whatever) or drive or truck it down to dmcfl.

  5. #5
    Junior Member
    Join Date:  Oct 2012

    Location:  Mt Holly, NC

    Posts:    8

    Club(s):   (DOA) (DCUK)

    Years ago there was a man called "DMC Joe" in Atlanta. He would make house calls in the southeast and had a shop in the Atl area. Maybe someone you know could locate him. Good luck.

  6. #6
    Junior Member DELOR1's Avatar
    Join Date:  Feb 2013

    Location:  SUWANEE GA

    Posts:    11

    My VIN:    3668

    Delorean mechanic

    Quote Originally Posted by DL4567 View Post
    I can recommend a good general mechanic in Suwanee. I've had things like wheel bearings, balancing, and A/C charging done on my DeLorean there and they are very careful and do good work. It's a small shop owned and run by 2 guys, and they do all the work themselves. I know Suwanee is far from you, so let me know if you're interested.

    Whatever you do, don't take it to American Resto Mods in Buford.
    I had the front rotors and bearings replaced by NOR-WEST in Suwanee. Did a good job and took care of my car.
    Good so Far!!!!!!
    JJ

  7. #7
    Senior Member DL4567's Avatar
    Join Date:  May 2011

    Location:  GA

    Posts:    774

    My VIN:    5302

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by DELOR1 View Post
    I had the front rotors and bearings replaced by NOR-WEST in Suwanee. Did a good job and took care of my car.
    Good so Far!!!!!!
    JJ
    Glad to hear they treated you well.
    Derek L
    VIN 5302

  8. #8
    Senior Member Dangermouse's Avatar
    Join Date:  May 2011

    Location:  Atlanta OTP GA

    Posts:    7,084

    My VIN:    2743

    Club(s):   (SEDOC) (DCH) (DCUK) (DOC-UK)

    DmcJoe has been out of the business for a few years now.
    Dermot
    VIN 2743, B/A, Frame 2227, engine 2320

    I don't always drive cars, but when I do, I prefer DeLoreans

    http://www.will-to-live.org

    No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"

  9. #9
    Senior Member Silverbullet's Avatar
    Join Date:  Jul 2012

    Location:  Brea, CA

    Posts:    602

    My VIN:    3757

    Ok,

    Cleaning the gas tank, and replacing the fuel pump with the new combo unit is EASY... Anyone can do it.... The accumulator you need some skill and short wrenches... The fuel filter, fuel distributor, and injectors are also needing attention my guess.... So the Volvo trained may be best if you can't get it to a DMC.

  10. #10
    Senior Member ccurzio's Avatar
    Join Date:  Nov 2011

    Location:  Atlanta-ish

    Posts:    2,218

    My VIN:    5311

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by Silverbullet View Post
    Ok,

    Cleaning the gas tank, and replacing the fuel pump with the new combo unit is EASY... Anyone can do it.... The accumulator you need some skill and short wrenches... The fuel filter, fuel distributor, and injectors are also needing attention my guess.... So the Volvo trained may be best if you can't get it to a DMC.
    I will agree that replacing the pump is very easy, but cleaning the tank is kind of a bitch to do. It's possible for a newbie (I did it), but I won't go so far as to say the cleaning process is anything short of a pain in the ass.

    The pump swap however is dead easy.
    - Chris


    what

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •