Looking for electrical connector boots for freq. valve, warm up reg., idle speed motor, other engine components... (other than from specialtauto)
Looking for electrical connector boots for freq. valve, warm up reg., idle speed motor, other engine components... (other than from specialtauto)
5*9*
Location: Renton, WA
Posts: 342
My VIN: 02261
Club(s): (PNDC)
http://www.eagleday.com/
Click on gray rectangle that says, Electrical Connectors Terminals Wires Tools.
Click on AMP Connectors/Terminals.
You will see there what look like your Bosch electrical connectors when in fact the real name is AMP Junior Connector –or- Amp Junior Power Timer. But, the word Bosch is so much easier to remember.
Please post if you are successful at getting the proper connectors and which ones go where. Some times I feel like mine need replacing since there are so many miles on my D but I have yet to try ordering those connectors.
The Double Crimp Tool with the red handle is what you need for the electrical terminals in your Fuse Box if it ever needs replacing.
Mark Vanyo
Links to DeLorean related web sites!
http://dmctalk.org/showthread.php?19...s-Part-I-of-II.
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
Standard plug available from Delcity.
www.deloreanindustries.com Every Detail Matters
Location: Kent, Wa
Posts: 44
My VIN: 2256
http://www.vehicle-wiring-products.eu
You can get a lot of those connectors for much cheaper here. Looks like eagleday.com actually gets a lot of their stuff from this site and resells it. They use the same exact pictures as the european site.
Location: Blacksburg, VA
Posts: 231
My VIN: 3472 (former)
Club(s): (DCVA) (DCUK)
For posterity, I was able to replace my WUR plug and boot with these items:
http://www.eagleday.com/2feampjupoti1.html
http://www.eagleday.com/ampcobo.html
Thanks for the recommendation, Mark!