I'm running MSII with a 3.57 board on the 3.0.
I'm using EDIS6 and also have a Wideband O2 sensor LC-1 installed.
I recently had the car tuned for the VE and cold driving.
The only issues I'm having are warm and hot starts. Anytime the engine is past 60 degrees it refuses to start unless its cranked multiple times... usually 5-6 attempts. and usually around 160-170 if it starts up it idles bad. if i shut her down and restart it idles just fine.
i assume my issues are in the cranking pulse and afterstart. but I don't know which way to go. I'll post my latest MSQ. And again it drives great, which is all I want the tuner to have done. I want to work on the starting myself to save some money.
Anyone have any techniques? Sometimes if I shut it right down and try to restart it, it starts great, I assume because small amount of fuel is in the cylinder. However if I push the gas all the way down to "flood clear" it starts as well... sometimes.
i don't really smell fuel so I'm guessing it needs to be higher in fuel.
Again the MSQ is a work in progress, please don't judge lol.
if anyone is available to help over the phone... that would be great too!
I will do my best to post updates as i go along, just hard with school and work.
thanks much in advance!
Darryl