FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15

Thread: Proposal for non-tech meet-up

  1. #11
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by nullset View Post
    I have 43 days to go…..

    Yikes!

    Got a list of what remains?
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

  2. #12
    Builder of the first Delorean Time Machine
    Join Date:  May 2011

    Location:  atlanta, ga, usa, earth, sol, milky way

    Posts:    1,088

    My VIN:    2072

    Club(s):   (SEDOC) (DCUK)

    Yup.

    1: Put it back together……



    Seriously though, I put the brake calipers back on the rear last night. Here's my legitimate list and rough order:
    - Mate engine and transmission
    - Put engine and transmission into frame
    - Connect transmission cooling lines
    - Reassemble gas tank / fuel pump /etc and install in frame
    - Reinstall radiator, run lines
    - Install intake manifold and exhaust
    - Put body/frame back together
    - Connect everything that joins the body and frame, etc
    - Reinstall rear bumper
    - Drive off into the sunset…(hopefully)
    - Change transmission fluid?
    - Rebuild enough of the interior that I can drive it in the parade
    - if there's time, make new props. if not, reinstall the crappy ones…..
    - Parade!

    Am I missing anything? probably…...

  3. #13
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    you should probably set up a schedule of benchmarks that you would like done so you can stay on task. Looks very doable with 43 days left on the clock. I mean half that list could be done tonight.
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

  4. #14
    Builder of the first Delorean Time Machine
    Join Date:  May 2011

    Location:  atlanta, ga, usa, earth, sol, milky way

    Posts:    1,088

    My VIN:    2072

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by sean View Post
    you should probably set up a schedule of benchmarks that you would like done so you can stay on task. Looks very doable with 43 days left on the clock. I mean half that list could be done tonight.
    Thanks for the encouragement!

    I think it's doable. The big unknown is whether the engine and transmission are good once I put it back together. If the either or both of those is bad, there's no way I'll make my deadline.

    The other unknown is "how many screws/bolts/nuts/washers did Buddy lose?". I hope the answer is not many….

    --buddy

  5. #15
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by nullset View Post
    Thanks for the encouragement!
    Hey, I got faith in the utility kilt!

    Quote Originally Posted by nullset View Post
    I think it's doable. The big unknown is whether the engine and transmission are good once I put it back together. If the either or both of those is bad, there's no way I'll make my deadline.
    It will no doubt be a heart pounding moment when it comes turn key time. Did you do any compression or leak down tests?

    Quote Originally Posted by nullset View Post
    The other unknown is "how many screws/bolts/nuts/washers did Buddy lose?". I hope the answer is not many….
    Lets hope none!
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •