FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 6 of 6

Thread: I-Bolt Inconel Trailing Arm Bolts now at DMC Midwest

  1. #1
    DMC Midwest - 815.459.6439 DMCMW Dave's Avatar
    Join Date:  May 2011

    Location:  Taylors SC

    Posts:    5,326

    My VIN:    (former)05429

    Club(s):   (DMWC) (DCUK)

    I-Bolt Inconel Trailing Arm Bolts now at DMC Midwest

    As I mentioned yesterday on the Trailing Arm Bolt discussion, DMC Midwest has been working on sourcing Inconel Trailing Arm Bolts at a reasonable price. DMC Midwest I-Bolts are now in, tested, and ready to ship.

    Inconel 718 is a stainless alloy that is stronger than the OE-type bolts, and rustproof (rust pitting caused by failure of the outer plating is the primary cause of failure in the OEM bolts). Nuts are included.

    We're offering a special introductory price of $119.95 for at least the first 10 sets. These can ship USPS flat rate or via UPS.

    To order call DMC Midwest at 815.459.6439 or email us at dmcmidwest(at)delorean.com with your shipping and contact info, and we'll follow up with a call for your billing information. Not orderable on the web just yet.


    I-Bolts_DMCMW.jpgI-Bolts_DMCMW (2).jpg
    Dave S
    DMC Midwest - retired but helping
    Greenville SC

  2. #2
    Senior Member - Owner since 2003 Patrick C's Avatar
    Join Date:  May 2011

    Location:  Northern Michigan

    Posts:    1,147

    My VIN:    1880

    Club(s):   (DCO) (DCUK)

    Very nice!!!
    Patrick C.
    VIN 1880

  3. #3
    Senior Member rdarlington's Avatar
    Join Date:  Aug 2013

    Location:  Los Alamos, NM

    Posts:    266

    My VIN:    10904

    Are these made on a CNC lathe from hex stock?

  4. #4
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    8,994

    My VIN:    03572

    Quote Originally Posted by rdarlington View Post
    Are these made on a CNC lathe from hex stock?
    I was thinking of making a set but it's the heat treating that stopped me from that idea.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  5. #5
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,457

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    E-mail sent

  6. #6
    Builder of the first Delorean Time Machine
    Join Date:  May 2011

    Location:  atlanta, ga, usa, earth, sol, milky way

    Posts:    1,088

    My VIN:    2072

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by Bitsyncmaster View Post
    I was thinking of making a set but it's the heat treating that stopped me from that idea.
    Machining Inconel is also not the easiest thing in the world....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •