Results 1 to 3 of 3

Thread: seatbelt stuck fully wound up

  1. #1
    Member jamesvnz's Avatar
    Join Date:  Mar 2013

    Location:  new zealand

    Posts:    78

    My VIN:    11376

    seatbelt stuck fully wound up

    hi I have a new seatbelt that is not in my delorean yet,

    but I pull the belt that's on the retractor unit I try and make it longer and it just goes click (like when you try and put a belt on in the car and you put too much force on it)

    even if I put in in the car I wont be able to use it!! its fully on the unit any tips would be great

    james

  2. #2
    Aussie Member Tillsy's Avatar
    Join Date:  Feb 2012

    Location:  Adelaide

    Posts:    920

    My VIN:    6679

    The unit reacts to the exact precise angle it sits at it the car.

    If you go hold it in position so that it sits exactly where it needs to, you'll find the unit will release the lock on the belt.

    Make sure you go to the correct side of the car for the unit you are holding, otherwise you'll still find it locked.
    Chris

  3. #3
    Member
    Join Date:  Nov 2014

    Location:  Northwest Florida

    Posts:    76

    Club(s):   (DCF)

    Thank you for this. Had this very same issue recently, and I was able to unlock it as you said.

    Quote Originally Posted by Tillsy View Post
    The unit reacts to the exact precise angle it sits at it the car.

    If you go hold it in position so that it sits exactly where it needs to, you'll find the unit will release the lock on the belt.

    Make sure you go to the correct side of the car for the unit you are holding, otherwise you'll still find it locked.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •