I'd like to get a 3d print of the little arms that go in the mirrors that eventually give out vs. spending $200 some odd dollars on a "new" mirror.
I'd like to get a 3d print of the little arms that go in the mirrors that eventually give out vs. spending $200 some odd dollars on a "new" mirror.
¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬°¬
2014 La Jolla Concours D'Elegance Volunteer
1998 Online Gamer; Everquest, AOE, R6, WOW, SOF
1981 DeLorean, Grey, Automatic, Flap, 12k preserved miles
1960 Volkswagen Beetle
1961 Cadillac Coupe DeVille - *Restoration in Progress*
Nice and cool these past few days actually. Btw, are you pretty familiar with the wiring, namely the doors and lights? The OO wired it so the passenger door only comes on when the driver door is poem, and it was working like that when it went to Danny's- so I be that car back and now the passenger door doesn't light up. There are some black wires on the driver side that look like they were spliced together - well twisted together and are not now, but connecting them back together does nothing.
Could be. I have to figure out what recently happened between having the car, sending it to Danny's, and then getting it back not working. They replaced the hood cable, and I'm guessing while in there they knocked the wiring loose. Just need to figure out what goes where so I can get power back to the passenger door - I'd like to get a switch back over there as well and have it working independently too.
I'd check the diodes
Are those up front of the center console or back where the relays and fuses are?
I was at Comic Con last night and briefly got to see these, as we got there late and only had a little time to look around:
Very high-resolution printing and at $999 not a bad price.
http://cubify.com/cube