FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 6 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 51

Thread: Styled by Giorgetto Giugiaro for DMC/Ital Design/Turin, Italy Badge

  1. #11
    Senior Member
    Join Date:  May 2011

    Posts:    841

    Post

    Quote Originally Posted by SIMid View Post
    If the VIN plate is on the driver's side, would this fit on the passenger side?

    Thinking of a good place to stick it.
    +1

    Thinking that too. If you look at the pic I took it is as wide or a little wider than the vent behind the door. I did some measuring and my guess is the plaque is 4" in length.
    If so, it will fit on the passenger side if facing forward like the VIN plate on the driver side. I think that would make a nice touch.

    I also like the idea of the "Handling by Lotus" badge, but would prefer it to be more low key without the bright green/yellow colors like this badge to display it either in the same location or elsewhere on the car in a way that looks like it came from the DMC factory....
    Last edited by DeloreanJoshQ; 07-25-2011 at 06:52 PM.

  2. #12
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by DeloreanJoshQ View Post
    +1

    Thinking that too. If you look at the pic I took it is as wide or a little wider than the vent behind the door. I did some measuring and my guess is the plaque is 4" in length.
    If so, it will fit on the passenger side if facing forward like the VIN plate on the driver side. I think that would make a nice touch.

    I also like the idea of the "Handling by Lotus" badge, but would prefer it to be more low key without the bright green/yellow colors like this badge to display it either in the same location or elsewhere on the car in a way that looks like it came from the DMC factory....
    I have one of those "Handling by Lotus" badges too (thanks to Wolff) and haven't decided what to do with it. Would love to hear ideas. Not sure I love it on the rear flank but it is pretty cool looking.

  3. #13
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    Quote Originally Posted by jawn101 View Post
    I have one of those "Handling by Lotus" badges too (thanks to Wolff) and haven't decided what to do with it. Would love to hear ideas. Not sure I love it on the rear flank but it is pretty cool looking.
    I was planning on putting it under the "DeLorean" on the rear bumper, aligned to the left with the "D"
    Dave

    Here, somewhere.


  4. #14
    Slickness of SS SIMid's Avatar
    Join Date:  May 2011

    Location:  Melbourne, Australia

    Posts:    1,380

    My VIN:    01955

    If it looks great on the opposite side of the VIN Plate, I might get one.

    ......... plus the SS lettering for the door sills.

  5. #15
    Senior Member john 05141's Avatar
    Join Date:  Jun 2011

    Location:  Hasselt, Belgium

    Posts:    898

    My VIN:    05141

    I have those "handling by Lotus" on the sides of my car, but after 2 years I'm thinking to remove them.
    I have a "designo Giugiaro" badge as well in the front door opening.

    John
    Attached Images

  6. #16
    Senior Member yellowmxwheels23's Avatar
    Join Date:  May 2011

    Location:  East County, San Diego

    Posts:    325

    My VIN:    747, Rally D, formally 10309, Marty Mcfly 85 Toyota, 2004 Mach 1

    Quote Originally Posted by DeloreanJoshQ View Post
    Where can I get the "Styled by Giorgetto Giugiaro for DMC/Ital Design/Turin, Italy" Badge?



    Thanks!

    Josh Q
    Is that a pic of my car? I have the styling badge in the exact same spot

  7. #17
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,385

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    I ended up putting mine in the engine bay, left of the light switch. It looks really nice.
    Dave

    Here, somewhere.


  8. #18
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by yellowmxwheels23 View Post
    Is that a pic of my car? I have the styling badge in the exact same spot
    That is where I've seen it on every car.
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

  9. #19
    Senior Member
    Join Date:  May 2011

    Posts:    841

    Post

    Quote Originally Posted by yellowmxwheels23 View Post
    Is that a pic of my car? I have the styling badge in the exact same spot
    I took that picture from a car at DCS 2010 inside the tent on Sunday morning IIRC....

  10. #20
    Motors about after dark Michael's Avatar
    Join Date:  May 2011

    Posts:    4,784

    My VIN:    Banged your VIN'S mom

    That badge would look good in the dash area, maybe on the shifter console or passenger knee pad.
    http://dmctalk.org/image.php?type=sigpic&userid=90&dateline=161808992  9

Page 2 of 6 FirstFirst 1 2 3 4 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •