Do any auto parts stores or hardware stores sell copper crush washers?
Location: Houston
Posts: 706
My VIN: 16113
Club(s): (SCDC) (DCUK)
Do any auto parts stores or hardware stores sell copper crush washers?
Shannon
Location: Atlanta OTP GA
Posts: 7,084
My VIN: 2743
Club(s): (SEDOC) (DCH) (DCUK) (DOC-UK)
I was just looking for some and couldn't find any at the usual places - FARPS.
The guy at NAPA of all places looked at me as if I had two heads when I asked him.
Dermot
VIN 2743, B/A, Frame 2227, engine 2320
I don't always drive cars, but when I do, I prefer DeLoreans
http://www.will-to-live.org
No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"
Location: San Antonio
Posts: 266
My VIN: 5628
Land rovers and vintage VW Beetles also require crushable washers
Location: San Antonio
Posts: 266
My VIN: 5628
Anyone know the mm diameter of the oil plug bolt?
Location: Happy Valley, OR
Posts: 1,709
My VIN: 4456 - Owner since March 2011
Club(s): (PNDC)
You are unlikely to find the "correct" sized ones at auto parts stores. Believe me I tried when I was reassmbling my fuel system and dropped a washer into the valley. With none to spare I scoured the market. I managed to find one with an suitable inside diameter but way larger outside. Fortunately it worked in the location I needed it.
One place I didn't try where you might have luck is plumbing supply places.
Cheers
Steven
Cheers
Steven Maguire
#4456
IT'S A TRAP!!!!!
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
I got some through an order at volvo. Took a few weeks and cost an arm and a leg. Order from a vendor.
Dave
Here, somewhere.
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
It really is shockingly difficult to find these things. Really don't understand why.
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze