RH Escutcheon AVAILABLE AGAIN!

[NightFlyer]

Mines stuck in customs in the US.

Our government doesn't actively enforce trade agreements with other nations (even if those nations enforce the terms of such agreements that benefit them against us), and screws over its citizens with an overly long and overly complicated customs process. Thinking about it just makes me sad, upset, and disappointed.

[DeLorean Museum]

In the recently acquired files of Chris Bradley, Head of the Experimental Workshop at the factory, there are some drawings showing a different method of attaching the escutcheon that were being considered that would not require any re-design of the part and associated tooling expense.

Sarah Heasty
The DeLorean Museum, Inc.
Find us on Facebook - http://facebook.com/deloreanmuseum

It would be good them to be someway reinforced... they're so fragile they WILL break again!

[DMCMW Dave]

In the recently acquired files of Chris Bradley, Head of the Experimental Workshop at the factory, there are some drawings showing a different method of attaching the escutcheon that were being considered that would not require any re-design of the part and associated tooling expense.
]

Drywall screws? I've seen a couple with that mod.

[DMCH James]

RH escutcheons will land here in Texas later this week. Contact your nearest dealer or shop http://store.delorean.com to order.

[5875]

I have an existing (original) RH Escutcheon that I need to put back into the door. The PO had removed it to work on unlocking a stuck door. Is there a trick to putting these back in? I tried lifting the inside door release and squeezing it in, but it will break if I push any harder. Any tips would be welcomed!

[vtdmc]

I wonder if a part like this could be reproduced using the 3D printing technology?

Ed says these are still 6-7 weeks away - once he has anything more than sample quantities in hand, all the US DMC dealers will have them soon after.

[robvanderveer]

I wonder if a part like this could be reproduced using the 3D printing technology?

i don't think so. Building this out of layers will be tricky as best.

[Trstno1]

Ok, now we just need to get the LH.....

[robvanderveer]

Ok, now we just need to get the LH.....

I have new LH and RH from DMC Eu, i don't see the problem.

[Tillsy]

Ok, now we just need to get the LH.....

They've been reproducing the left one for years.