Does the Lambda relay always get hot?

[Bitsyncmaster]

Dave, do you still offer the solid state Lambda relay? Does it still require the wiring change?

I never made a Lambda relay for plug and play. It just takes one wire change to use the standard relay or one of my solid state standard relays.

Yes the Lambda relay gets hot. Never knew why the design used a relay with two common output pins. I guess they were trying to fix an electrical noise problem. This was the second relay I replaced after the RPM relay because of the heating and the fact it is always on with the engine running.

All you need to do is pull the center pin (red/purple wire) from the socket and connect that wire to the green/yellow wire on the pin above the center.