I just got my broken screw out and id like to clear the threads. It looks like its M8 with a 1mm pitch instead of 1.25mm, but id like to make sure first.
I just got my broken screw out and id like to clear the threads. It looks like its M8 with a 1mm pitch instead of 1.25mm, but id like to make sure first.
Location: Northern NJ
Posts: 8,583
My VIN: 10757 1st place Concourse 1998
Even if you can get a bolt with the same thread size, the bleeder is hollow with a flare at the end to seal. Just order one from a Delorean vendor. If you need anything else like an oil filter, some bulbs, air filter, etc add it to the order. if you have a 5-speed an extra pivot bolt is always good to have.
David Teitelbaum
Location: West Sayville, N.Y.
Posts: 1,350
My VIN: 005058 000927
Club(s): (AZ-D) (DMA) (DOA) (DCUK)
Dn010 is right. I already got a new bleeder screw. Thanks for the info guys. I would have gotten the stainless one if I didn't already have a new one.