Ahh prolly a little outta my expertise..wouldnt know where to begin in making a logic box.
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Ahh prolly a little outta my expertise..wouldnt know where to begin in making a logic box.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
I thought I posted this updated version (I added main harness connections...no errors to previous reported).
CompleteGovernorComputerUPGRADED062017.jpg
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Thanks for this, Ron! It is extremely helpful to have all of that info on a single page.
3.0L, automatic, carbureted
Ron. Thanks for all the great information here.
What is the process for using the test lamps?
Does the car have to be in motion/driving to see the sequence of test lamps, per the logic described in the diagram on the first post?
Currently resurrecting Vin # 11789 - One of the batch of 50 exported to the Middle East in 1982.
+1...on jackstands, or long wires if you want to watch them under load.
Location: New Jersey
Posts: 227
My VIN: ******* 01860 - Legend TT 06068 - VQ35 SC
Club(s): (DMA)
Great information. I have repaired dozens of these over the last 20 years- don't think I have seen all of the data collected in one place like this before. Nice job!
__________________________________________________ ____________________
Got any new Purflux oil filters? I may want to buy them.
Learn about Vin 01860 with a Legend Industries engine: https://malevy-dmc.blogspot.com/2022...oDeLorean.html
I can fix your Craig W460 radio: https://malevy-dmc.blogspot.com/2022...te-player.html
Posts: 76
My VIN: 7012
The light indicators make sense for the gears, thanks for this inspiration! If I wanted to make an indicator for Park/Neutral, would I tap into the yellow/white wire?
EDIT - I would probably feed signals into an Arduino (I think this is what is meant by logic box?) and then control the output indicators from there. So maybe it makes sense to connect Arduino pins as INPUT_PULLUP to the grounds (B, D, 6) and read the voltage value of them to determine what gear the car is in?
Last edited by mike123; 11-09-2023 at 06:11 PM.
Location: New Jersey
Posts: 227
My VIN: ******* 01860 - Legend TT 06068 - VQ35 SC
Club(s): (DMA)
Yellow/White wire is grounded when the transmission is in neutral or park. It completes the circuit for the start inhibit relay.
__________________________________________________ ____________________
Got any new Purflux oil filters? I may want to buy them.
Learn about Vin 01860 with a Legend Industries engine: https://malevy-dmc.blogspot.com/2022...oDeLorean.html
I can fix your Craig W460 radio: https://malevy-dmc.blogspot.com/2022...te-player.html
Posts: 76
My VIN: 7012
Thank you!