Location: San Francisco Bay Area, Calif.
Posts: 2,084
My VIN: 0934
Club(s): (NCDMC) (DCUK)
Last edited by Rich; 10-29-2015 at 12:13 AM.
March '81, 5-speed, black interior
Yes- I do believe that mine are 70's in front...Which would make the tire a bit taller. But again, we are dealing only in Millimeters. My rears are stock size. No matter how you slice it, what I did works. It is important to understand what tire sizes really mean. Most people do not understand what those numbers stand for...
Location: Happy Valley, OR
Posts: 1,709
My VIN: 4456 - Owner since March 2011
Club(s): (PNDC)
True... But unless my math and understanding is wrong the second number is the aspect ratio - Height of sidewall to width of tire. In this case the difference between a 60 and a 70 is actually about 2 cm - probably still not noticeable. I might go 70s in front and back so as to keep all things equal.
Cheers
Steven
Cheers
Steven Maguire
#4456
IT'S A TRAP!!!!!
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
Update coming soon.
Dave
Here, somewhere.
Location: West Islip, NY
Posts: 244
My VIN: 16377
Just wanted to add that I have been sending an email to BF Goodrich every Monday since the start of this thread.
I have gotten basically the same answer, but I figured it was good to be persistent.
Thanks.
-Nick Pitello
Location: New York, NY
Posts: 280
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Good news