I can see the wiring on that odd duck grey/blue-ish harness and that seems correct. So yeah it looks like someone has done some work on those before.
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
I can see the wiring on that odd duck grey/blue-ish harness and that seems correct. So yeah it looks like someone has done some work on those before.
Dave
Here, somewhere.
Location: Edmonton Alberta Canada
Posts: 25
My VIN: 6683
Club(s): (TXDMC) (DOI)
Last edited by Gavin; 06-14-2017 at 12:52 AM.
Gavin
Vin 6683
02 RSX
12 Ram 1500
Location: Edmonton Alberta Canada
Posts: 25
My VIN: 6683
Club(s): (TXDMC) (DOI)
Gavin
Vin 6683
02 RSX
12 Ram 1500
Location: Vancouver, BC
Posts: 3,385
My VIN: thirty two 'o five
Club(s): (PNDC)
That's not a bad idle at all.
Dave
Here, somewhere.
Location: Edmonton Alberta Canada
Posts: 25
My VIN: 6683
Club(s): (TXDMC) (DOI)
Gavin
Vin 6683
02 RSX
12 Ram 1500
Location: Edmonton Alberta Canada
Posts: 25
My VIN: 6683
Club(s): (TXDMC) (DOI)
Last edited by Gavin; 06-14-2017 at 01:02 AM. Reason: Wrong video uploaded
Gavin
Vin 6683
02 RSX
12 Ram 1500
Location: Edmonton Alberta Canada
Posts: 25
My VIN: 6683
Club(s): (TXDMC) (DOI)
Ok.. so if the idle is fine, what might cause my engine to fail to rev when driving. After about half an hour everything seemed fine. Worried this will happen again if I drive it.
Sent from my iPhone using Tapatalk
Gavin
Vin 6683
02 RSX
12 Ram 1500
RIP Rob van de Veer Top bloke
I say Sir, I must be mad, one loves fixing K-Jet !
Make sure there's plenty in the tank for the weekend chaps....
Location: Edmonton Alberta Canada
Posts: 25
My VIN: 6683
Club(s): (TXDMC) (DOI)