Is it possible to get Power Steering in an Automatic Delorean?
Location: St Petersburg , FL
Posts: 129
My VIN: 1225
Club(s): (DCF)
Is it possible to get Power Steering in an Automatic Delorean?
Yes.
http://www.delorean.eu/catalog/produ...3705d6d8d12220
May also be available at DMCMW. Unsure about the other franchises. Call and ask.
Jim Reeve
DMC6960
D-Status: - Getting some Spring exercise
Location: Farmington Hills, MI
Posts: 180
My VIN: 16619
It's defiantly possible, the amount of work, time and money is entirely up to you. It maybe easier to use Electric Power Steering(EPS) as you would need to find an old Power Steering Pully then route custom hoses from back to front.
Some EPS units have electric motor attached to the Steering column which may be the easiest to implement. Or could try using the larger EPS units used in vehicles like the new Altima, Pathfinder and JX, but that may be a bit impractical to try putting on the DeLorean.
Not sure if there is a "Universal" Kit available, but probably could buy from a dealership for a specific vehicle. By doing so, you will essentially need to replace the entire Steering Column and Steering wheel. This will also probably lead to changing the Turn/Light and Wiper Switches.
EDIT: Or get that thing posted above, looks pretty neat!
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Defiant power steering ... Hmm...
3.0L, automatic, carbureted
I think it would be easier to go to the Gym and bulk up the arms...
Location: Rochester, NY
Posts: 2,405
My VIN: 01049
WOW, that is expensive!!!!
-Mike
My engine twists my frame.
1981 DeLorean, Carb LS4 swap completed
1999 Corvette, cam/headers/intake manifold, 400 rwhp
2005 Elise, stock
2016 Chevy Cruze
Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
It completely changes the character of the car. Very nice when parking, but there is some loss of steering feedback i.e. the "sports car" feel. This is a common complaint on modern cars with electric power steering as well as there is more internal friction in the mechanism itself than in a plain steering column.
Dave S
DMC Midwest - retired but helping
Greenville SC