Cant imagine it would be too expensive a part (but then I been wrong before..hehe)
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Cant imagine it would be too expensive a part (but then I been wrong before..hehe)
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: NYS
Posts: 2,511
My VIN: 4519
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Ouchie. Maybe you'll be able to glue something in there...though looking at it, doesnt look like there's much to glue to
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: NYS
Posts: 2,511
My VIN: 4519
For anyone who knows [without guessing, please:]
Does this actuator only open & close the center console vents, and affect nothing else?
With the actuator linkage broken and the vent propped open, I'd have full-time air through the vent....correct?
I'm guessing that's the only thing it affects.
Location: NYS
Posts: 2,511
My VIN: 4519
Wow, nice bit of luck today. I was looking through the small pile of stuff I cleaned out of the car when I first bought it and found the broken-off piece of the actuator. 2 years ago when I bought the car & cleaned it out, I remember seeing that piece & thinking: "I wonder WTH that thing is?!"
Gotta get lucky sometimes!
I used superglue to hold it together while I work on a permanent, reinforced fix.
IMG_4536.jpgIMG_4539.jpg
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
Cool...hopefully the glue holds. Always good to keep them wtf peices, til you're sure they're for a volkswagon scirocco or something...hehe.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: NYS
Posts: 2,511
My VIN: 4519
This is my drivers window in the fully-closed position, can this gap be fixed by adjusting?
IMG_4618.jpg
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
does it seem to slip or angle while its going up at all? Looks like it slipped on the carrier to me.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon
Location: NYS
Posts: 2,511
My VIN: 4519
Location: Tacoma, Wa
Posts: 2,208
My VIN: 4877
Club(s): (PNDC)
unless its not going all the way up, I'd expect it to be jamming with it that far off.
Make sure the track is bolted to the grab handle bracket inside the door..it might pushing down a bit if its not.
Ill take a pic of where I'm talking here in a bit so you can see where I mean.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Website
YouTube
My Patreon