Are the HEIM joints really needed? why not just plain FLAT SHOULDER BOLTS
https://www.mcmaster.com/mvA/Content...=ImageNotFound
Location: Derwood, MD
Posts: 21
Club(s): (DMA)
Are the HEIM joints really needed? why not just plain FLAT SHOULDER BOLTS
https://www.mcmaster.com/mvA/Content...=ImageNotFound
If the surface on the chain cover and the alternator are on the same plane then you can. If not you will need a longer bolt and a spacer, you can make it work.
You can get these at Lowes for a few dollars that will work the same as those HEIM joints in this application.
038613124929.jpg
You'll have to find the right size
https://www.lowes.com/pd/National-Ha...MD2bA3KusrUth4