Stainless bumper letters

[alexwolf1216]

Hey guys,

Who sells the rear stainless steel-look bumper letters? My bumper looks a little lonely :sad30:

I saw some on eBay, but I am curious if someone has a recommendation of a reputable place.

[acaciolo]

here are real stainless ones...

http://www.delorean.eu/catalog/product_info.php?products_id=127031

[DMCCA Cameron]

We sell them in our store and on the Website.
http://store.delorean.com/p-9244-ss-letters-rear-fascia.aspx

Cameron Wynne
Delorean Motor Company California
714-842-0040

[acaciolo]

even better!

[mluder]

Slightly off-topi... Can they be removed and re-installed without destroying them?
I want to get my fascias repainted and include the bumpers... I could mask them off but I'd prefer to remove and re-install.

[David T]

Slightly off-topi... Can they be removed and re-installed without destroying them?
I want to get my fascias repainted and include the bumpers... I could mask them off but I'd prefer to remove and re-install.

If you are REALLY careful and don't bend them. Masking them is probably the best thing to do. Maybe using a heat gun to soften the glue? If they are really there tight I would leave them alone and mask them off.

[RoyHinkley]

The ones I bought from Europe didn't have adhesive tape to attach them so I had to use double sided 3M tape which worked very well. Been on for a few years now and still secure. I'm sure they would bend if an attempt was made at removing them. So use SEM trim black to pain the bumper before installing them.

[NightFlyer]

DPI sells a nice kit that includes an alcohol wipe.

[Nicholas R]

Does anyone still sell the stainless "DMC" letters that fit on top of the doorsill letters? They're just about the perfect size to fit the fuel rail covers that I want to make. Unfortunately I haven't seen them for sale in quite a while.

[djdogbone]

I bought stickers that look like metal for the door jams

[RoyHinkley]

Does anyone still sell the stainless "DMC" letters that fit on top of the doorsill letters? They're just about the perfect size to fit the fuel rail covers that I want to make. Unfortunately I haven't seen them for sale in quite a while.

I got those too from the Europe seller

[D Knight]

Bought mine from MW years ago. Still look like new


-D Knight-

[djdogbone]

here is where I got mine. $25 not a bad deal and look real good. You get JUST the letters, nothing else

http://www.ebay.com/itm/DELOREAN-SIDE-DOOR-LETTERS-DMC-DELOREAN-DMC12-/191242562377?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c86f1eb49

[Chris 16409]

Take a look here:

http://www.deloreaneurotec.co.uk/forum/viewforum.php?f=102&sid=70200c22c0815ffd6017ee3202892f94

[Nicholas R]

here is where I got mine. $25 not a bad deal and look real good. You get JUST the letters, nothing else

http://www.ebay.com/itm/DELOREAN-SIDE-DOOR-LETTERS-DMC-DELOREAN-DMC12-/191242562377?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c86f1eb49

I've seen those but they're just printed milar, not stainless steel like I want.



Take a look here:

http://www.deloreaneurotec.co.uk/forum/viewforum.php?f=102&sid=70200c22c0815ffd6017ee3202892f94

That looks great! Thanks!

[Bitsyncmaster]

I bought my SS letters at the DCS-2008 show. It was one of the DMC vendors. I removed any paint under the letters with MEK and Q-tips to be sure they would stick. So far they show no sign of coming off. If I ever paint the bumper, I would mask them off. I don't think you could pull them off without bending them.

[papanoel]

I've seen those but they're just printed milar, not stainless steel like I want.




That looks great! Thanks!


I believe Rob Grady has them. But I'm not sure.

[SIMid]

The UK Club store has both for sale from memory. Bumper letters and door sill lettering.

[Flash66]

Support your local vendors! DMCMW DPI CA.

[Delorean Industries]

Only have about 130 sets left in stock :)

[beernpizzalover]

I've seen those but they're just printed milar, not stainless steel like I want.

I bought some made out of Mylar, on Ebay. Here's what they look like installed on the bumper:

[Jacko]

It must have been in '84 when I bought the SS letters for the bumper.
I bought them from Ed B at D one who gave his personal guarantee that they
would never come off. Here it is thirty years later and they still look new.

[Nicholas R]

I bought some made out of Mylar, on Ebay. Here's what they look like installed on the bumper:

Those do look good!

For what I'm doing, I do want the 3D aspect of the stainless steel.

[Rich_NYS]

Only have about 130 sets left in stock :)

Hey Josh, good to meet you at DCS.

...are the letters on your site?

[Flash66]

Only have about 130 sets left in stock :)

How much Josh?

[Gfrank]

How much Josh?


Hey Josh, good to meet you at DCS.

...are the letters on your site?

I don't think they are, Josh's site sucks lol. Got mine from him during Dcs, love em!

29047

[jawn101]

Got mine from the UK Club site, same with my side sill letters. Both are very nice and were reasonably priced.

[Riley88]

Looking at picking some of these up. Sweet!

[Riley88]

Josh do you have a link to the letters on your site? I'm wanting to buy! Your shop looks awesome and I want to support it

[Delorean Industries]

Must not have made it in the site transfer. I will post the picture again shortly. and thank you!

http://www.deloreanindustries.com/stainless-rear-bumper-letter-kit/

[Shep]

Must not have made it in the site transfer.Just checked, wasn't on the original site either :)

[Riley88]

Was going to ask anyone who has bought them , do you also have to buy the mounting material like the 3m paint or glue?Or does it com with it?

[sdg3205]

Comes with it

[bandit]

Hi Guys, as mentioned in this thread, I do the bumper & sill letters (as well as some other stuff) I have just had another batch cut, so have plenty in stock. They are really nice quality, proper stainless, in the brushed finish.
£10.00 for sill letters both sides
£20.00 rear bumper letters
Only £3.00 to post them to you in the US

Cheers Julian

http://www.deloreaneurotec.co.uk/forum/viewforum.php?f=102

[steve]

Just received mine and I must say very pleased:cheers:

[bandit]

Just received mine and I must say very pleased:cheers:

Cheers Steve, glad you like 'em

Julian

[DMC-81]

Comes with it

Hi folks,

Just for comparison, do all the vendors' rear letter sets come with the mounting tape? Also, is the tape precut in the shape of the letters or do you do that yourself? Vendors, some pictures of the letters before installation would be great.

[DMCCA Cameron]

Hi folks,

Just for comparison, do all the vendors' rear letter sets come with the mounting tape? Also, is the tape precut in the shape of the letters or do you do that yourself? Vendors, some pictures of the letters before installation would be great.

Ours have the 3m sticky tape already applied to the back of the letters ready for install.
http://store.delorean.com/p-9244-ss-letters-rear-fascia.aspx

Cameron Wynne
DMC_CA

[SS Spoiler]

If you want to get radical, try lighted letters. I had my rear bumper off for repairs when I had an idea.
Took a saber saw and carefully cut each letter out. Then I siliconed some red plastic from some old exit lights
to the inside of the bumper. A neon tube from JC Whitney carved into the foam made a one of a kind neat
addition to night time driving. The purist may balk, but my bumper was in rough shape anyway.

[DMC-81]

Ours have the 3m sticky tape already applied to the back of the letters ready for install.
http://store.delorean.com/p-9244-ss-letters-rear-fascia.aspx

Cameron Wynne
DMC_CA

Thank you Cameron.

[bandit]

Tiger seal, or similar silicone sealer is perfect for the job. A couple of blobs on each letter & they are not coming off any time soon, unless you want them to, then its really simple to remove them, if you ever want to paint the bumper.

[DMC-81]

Hi Guys, as mentioned in this thread, I do the bumper & sill letters (as well as some other stuff) I have just had another batch cut, so have plenty in stock. They are really nice quality, proper stainless, in the brushed finish.
£10.00 for sill letters both sides
£20.00 rear bumper letters
Only £3.00 to post them to you in the US

Cheers Julian

http://www.deloreaneurotec.co.uk/forum/viewforum.php?f=102

PM sent.

[alexwolf1216]

do you still do the lower engine cover stainless vents?

[bandit]

do you still do the lower engine cover stainless vents?

Yes, got plenty in stock