DMC Tail Light Boards

[STAINLS]

Just got my set of tail light boards from the great Dave and Julee. I have to say, they're very nice. Especially for the price. Call me old fashioned but I stuck with the incandescent bulbs. Install was obviously pretty easy. Only thing I noticed was it was a little tight of a fit with the 2 center pegs that ride in the 2 little slots in the center of the boards, but that was easily overcome and hardly an issue. Had my wife hop in and work the brakes, running lights, and turn signals......presto! All my lights come on! I'm having connection issues with my reverse switch so I don't have pics of reverse lights unfortunately. Here's some pics of the boards and the lights in all their glory!

Again, VERY BIG thanks to Dave and Julee!! Thanks for letting people know when I stop!! :fancy:

[DMCMW Dave]

Reposting as I messed up the attachments the first time. :mad1:

I've installed a set of the LED boards on my own car with a modification to make the tail light come on with the brake lights when the headlights are turned off, i.e. in the daytime.

Lights only:
29885

Lights with Brakes
29883

Brakes Only (note side marker lights)
29884

Reverse
29886

Hazards
29887

[Domi]

A board with a new PCB which allow to light up all the red light would be nice.
Small light for the light only including the two brakes and brighter when you hit the brakes on the two red light brakes.

[STAINLS]

Reposting as I messed up the attachments the first time. :mad1:

I've installed a set of the LED boards on my own car with a modification to make the tail light come on with the brake lights when the headlights are turned off, i.e. in the daytime.

Lights only:
29885

Lights with Brakes
29883

Brakes Only (note side marker lights)
29884

Reverse
29886

Hazards
29887


Nice work Dave!!! Looks good!

[DMCMW Dave]

A board with a new PCB which allow to light up all the red light would be nice.
Small light for the light only including the two brakes and brighter when you hit the brakes on the two red light brakes.

The Colorado club was showing something like that at DCS (not ours). Looked nice. Probably 2x to 3x the price, not mass market.

---------------------------------------------------

This is our new board with LEDs plus about 20 cents in diodes ($4 at Radio Shack).

[jawn101]

Dave - are there any plans for you guys to sell an LED only kit for those with good/other aftermarket boards already?

[DMCMW Dave]

Not that I know of but replacement parts should be available. James will have to answer on this one.

[NightFlyer]

Dave - are there any plans for you guys to sell an LED only kit for those with good/other aftermarket boards already?

Links to the LED bulbs seen in the video can be found in the following thread:

http://dmctalk.org/showthread.php?7302-LED-Tailight-kit&p=111829&viewfull=1#post111829


https://www.youtube.com/watch?v=eaM1OX95228

[alexwolf1216]

Links to the LED bulbs seen in the video can be found in the following thread:

http://dmctalk.org/showthread.php?7302-LED-Tailight-kit&p=111829&viewfull=1#post111829


https://www.youtube.com/watch?v=eaM1OX95228

Looks like those reverse lights arent available anymore.

[NightFlyer]

Looks like those reverse lights arent available anymore.

Same thing :)

http://www.ebay.com/itm/1156-Super-White-Cree-Q5-LED-Bulbs-12pcs-5050-SMD-7W-Backup-Reverse-Bulbs-NEW-/281099686840?pt=Motors_Car_Truck_Parts_Accessories&hash=item4172d8d3b8&vxp=mtr

[alexwolf1216]

Same thing :)

http://www.ebay.com/itm/1156-Super-White-Cree-Q5-LED-Bulbs-12pcs-5050-SMD-7W-Backup-Reverse-Bulbs-NEW-/281099686840?pt=Motors_Car_Truck_Parts_Accessories&hash=item4172d8d3b8&vxp=mtr

Well la-tee-da.....its too early for me.:sleep:

[Domi]

The Colorado club was showing something like that at DCS (not ours). Looked nice. Probably 2x to 3x the price, not mass market.


Do you have a link with pictures by any chances?

[DMCMW Dave]

Do you have a link with pictures by any chances?

No, I was hoping the guys actually selling them would chime in by now.

[Bitsyncmaster]

Do you have a link with pictures by any chances?

I was shown the board. It was a full size black board with lots of surface mount LEDs soldered on the board. It looked very nicely designed. I would guess the price to sell them would be to high for most owners. Of course there are always some owners that getting the best where price does not matter.

[DMCMW Dave]

I was shown the board. It was a full size black board with lots of surface mount LEDs soldered on the board. It looked very nicely designed..

It even had a toggle switch on the board so you could switch it between "normal" and "extra brake light" mode.

[Domi]

I was shown the board. It was a full size black board with lots of surface mount LEDs soldered on the board. It looked very nicely designed. I would guess the price to sell them would be to high for most owners. Of course there are always some owners that getting the best where price does not matter.

Maybe if several owner are ready to buy them, the price will decrease.
Anyway, it will be nice if the owner of this board will create a new thread to explain how it works.
Maybe Tomcio has the knowledge to design such a board :)

[Tillsy]

I was shown the board. It was a full size black board with lots of surface mount LEDs soldered on the board.

I wonder if it animates like the DMCH one was going to when they were first working on it many years back?